FEIN - Akku Winkelschleifer Typ CCG18-125-10 AS Ø125mm Solo

Execution

Guarantees maximum service life with the next generation of brushless FEIN PowerDrive motors. Fully enclosed motor housing protects the motor from aggressive ceramic and mineral dusts.
Ideal for any application. Optimal rotation speeds, designed for a range of abrasives and materials via continuous, electronic speed preselection.
High-performance. 30 % higher efficiency than comparable universal motors with an input power of 1,080 watts. Delivers the same power as an equivalent wired angle grinder at 1,080 watts. Maintenance-free motor with innovative cooling fins for optimum cooling, including temperature monitoring.
COOLPACK 2.0 technology provides 135 % longer rechargeable battery life for extended operating times. State-of-the-art cell technology and intelligent rechargeable battery management provide 87 % more power than conventional rechargeable batteries.
ProCORE Li-ion rechargeable battery with high-power cells, state-of-charge indicator and "Electronic Cell Protection" (ECP). ECP protects the rechargeable battery against overload, overheating and deep discharge.
Smooth operation and low vibration thanks to the independently mounted motor decoupled from the housing and four additional vibration dampers.
Comprehensive user protection through soft start function, restart protection, electronic overload protection and brake.
Effortless work thanks to slim size, compact design and low weight with good balance.
Dust-protected, separate motor electronics in the grip area.
Short setup times with tool-free adjustable protective cover and quick-action clamping nut. Bright working area thanks to integrated LED light. Well-equipped for any application. Working on the go with the L-BOXX system.
Compatible with all 18 V AMPShare ProCORE rechargeable batteries and chargers for even greater power and flexibility. Also suitable for 18 V Bosch Professional cordless devices.

Delivery
1x protective cover
1x tool-free quick-action clamping nut
1x anti-vibration handle
1x key
1x plastic tool case (L-Box 238)

Brand: FEIN
Washer diameter: 125 mm
Battery included in delivery: No
Battery voltage: 18 V
Max. idle speed: 8500 rpm
Motor design: Brushless motor
Weight: 2,0 kg
Thread dimension of spindle: M14
With dead man function: No
With speed control: Yes
With soft start: Yes
With overload protection: Yes
With disc brake: Yes
With restart protection: Yes
With quick clamping system: Yes
With working lights: Yes
With reverse switch off: No
Min./max. idle speed: 2500-8500 U/min(rpm)
Noise level: 97 dB
Sound-pressure level: 86 dB
With speed pre-selection: Yes

Akku Winkelschleifer Typ CCG18-125-10 AS Ø125mm Solo

Akku Winkelschleifer Typ CCG18-125-10 AS Ø125mm Solo

Description

Technical data

More details

Additional articles

No workshop should be without it:

ATORN A-Shield 3 cut protection glove, size 9

ATORN steel cutting disc 125x1 mm

WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade

ATORN A-Mech 4 assembly glove, size 9

Tabletop scales type FCE 15 K5 w/LC display reading 5g max. weighing range 15kg

ATORN cross-peen hammer 1,000 g, hickory handle, nylon handle protect. sleeve

Ergonomic safety double lock knife SECUPRO 625

3D art. meas. stand with central clamping and micro fine adj., height 390 mm

Adapter set 958/7

ATORN countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank

Funnel set 6 pieces dia. 50, 75, 100, 120, 150, 160 mm polyethylene

Wire-stripping pliers PreciStrip16 type 12 52 195

Spray bottle refillable 227 ml max. operating pressure 8 bar 0.4 kg

ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm

Twist drill bit set HSS-E Co5 1-10 mm 0.5 mm incremental 19 pieces

T-handle 411 A RA T-handle

Kegelsenker-Satz 90° HSS-TiAlN Form C ungl. Teilung 3 Spannflächen Ø 6,3-25,0 mm

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-10 mm 0.5 in box

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10 mm 0.5 in box

Multiclean cleaning cloth roll 1000 pcs 34x37 cm 2 ply blue perforated absorbent

ATORN try square stainless 150 x 100 mm in line with DIN 875 precision 1

ATORN quick-change bit holder, 1/4 inch x 60 mm

ATORN flat square, stainless 150 x 100 mm in line with DIN 875 precision 1

ATORN VDE screwdriver set, 3 pcs, cross head PH 1-3

Protective vice jaw set 125 mm 8 pieces in bag

Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6

ATORN countersink set 90° HSS, extremely unequal pitch 6.3-20.5 mm

Inspektionskamera VideoPocket HD

Long hexagon ball head pin wrench set 9 pcs in clip AF 1.5/2/2.5/3/4/5/6/8/10

Safety goggles MAX A1 lens clear

TX® screwdriver set 9 pieces T10-50

Pliers set, 3 pcs Combination pliers, snipe nose pliers, side cutters

LOCTITE LB 8040 rapid rust remover 400 ml

Industrial atomiser type R36.501 with 360° suction system

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-10.5 mm 0.5 and CHD

Pliers set, 3 pcs comb. pliers, side cutters, high-tech water pump pliers

ATORN micrometer 0-25 mm, in case

ATORN TX screwdriver set, 5 pcs, TX 10, 15, 20, 25, 30

Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.

ATORN corundum abrasive fabric sheets (AO) G100 230 x 280 mm

ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm

LOCTITE 270 threadlocker 50 g

LOCTITE 243 threadlocker 50 g

ATORN hexagon screwdriver set, 9 pieces, 1.5–10 mm, with ball head, long

ATORN 6-piece measuring instrument set, wooden case, digital vernier callipers

ATORN NC machine reamer set, 3.0-12.0 mm, H7, HSSE

ATORN HSSE machine tap set M3-12 HSSE GL

Lamella flap disc Z SG POWER STEELOX, dia. 125 mm, alumina zirconia, 40 grit

ATORN centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5

Prec. countersink set 5 pcs HSS-E Alunit d. 6.3/10.4/16.5/20.5/25.0 mm

Spiralbohrer-Satz Sprint Master 25tlg. DIN 338 HSS Ø 1,0-13,0 mm in Kassette

ATORN disposable ear plugs, 400 pairs

ATORN bit box 32 pcs, slotted, PH, PZ, hexagon socket, TX, with holder a. handle

ATORN A-Shield 4 cut protection glove, size 9

ATORN reusable corded ear plugs

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10 mm 0.5 in box

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 and CHD

ATORN HSSE machine tap set M3-12 HSSE DL

Pneumatic special oil 100 ml silicone-free with locking cap

ATORN countersink set, 90°, HSS, extremely unequal pitch 6.3-20.5mm, 3-flat shnk

ATORN banded ear plugs, 32 dB

Kegelsenker-Satz 90° HSS-TiAlN Form C ungl. Teilung 3 Spannflächen Ø 6,3-20,5 mm

Pneumatic hose reel hose dia. 13 mm, hose length 15 m max. 20 bar

ATORN twist drill bit set N HSS TIN head DIN 338 1.0-10.0 mm in assortment case

HHW twist drill bit set DIN 338 HSS type N dia. 1-13.0 mm in box

ErgoStrip universal stripping tool 0.2-4.0 mm length 135 mm right-handed

Cs. + cs. deburring tool set 6 pcs 90° HSS-E dia. 6.3-20.5 mm in metal box

ATORN bit socket wrench set, 6 pieces, hexagon head

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 and CHD

Taschenbandmaß 411 Vario EG I Bandbreite 13 mm Länge 3 m

Set of flat hand engineer's files with handle, 5 pieces, L=200mm, German cut 2

ATORN A-Shield 1 cut protection glove, size 9

ATORN screwdriver set in workshop stand, 7 pieces