RAKSO - Wire wool grade of fineness medium 0

Application
Wood: For sanding after priming and before applying the first paint layer. The natural grain pattern is greatly enhanced on textured woods.
Paint: Removes old paint layers from antique furniture in combination with paint stripper. Roughens old painted surfaces before applying new paint.
Metal: Cleans copper pipes and copper fittings before soldering. Removes stubborn dirt, surface rust, oil contamination and limescale deposits.
Cleaning: Ideal for removing dirt from garden furniture and blinds. Glass blocks and tiles are effectively cleaned without scratching.

Execution

Fine types numbers 0000, 000 and 00 can be used to smooth wood after staining, spruce up waxed woods with new wax, thoroughly and gently clean plastic blinds and garden furniture and polish aluminium, copper and brass
Medium types numbers 0, 1 and 2 can be used to smooth wood after priming, remove old paints using solvents, sand plasterboard, remove dirt residues from tiles and stone flooring and polish copper piping and fittings before soldering
Coarser types numbers 3, 4 and 5 can be used to enhance natural grain patterns in softwoods (pine, spruce), clean glazing and glass blocks and roughen old paint and coatings
Stark verschmutzte Oberflächen:
Zum Entfernen von Fett oder Öl von Oberflächen, besonders bei hartnäckigen Verschmutzungen.
Reinigung von Glasoberflächen / Fenstern:
Zur Beseitigung von hartnäckigen Ablagerungen wie Rost, Mineralien oder Schmutz von Glas.
ACHTUNG: Hierbei sollte jedoch eine sehr feine Stahlwolle (ab der Feinheitsgrad gelb 00) verwendet werden, um das Glas nicht zu zerkratzen.

Advantage
RAKSO STEEL WOOL is available in nine varieties with a clear colour coding system: YELLOW is for fine types, ORANGE for medium types and RED for coarser types.

Notes
Beim Arbeiten mit Stahlwolle sind Schutzhandschuhe zu verwenden, da die feinen Drähte kleine Hautverletzungen verursachen können.
Zudem sollte man bei der Verwendung in feuchten Umgebungen darauf achten, dass keine Rostbildung auftritt, wenn die Stahlwolle in Kontakt mit Wasser kommt.

Wire wool grade of fineness medium 0

Wire wool grade of fineness medium 0

Description

Technical data

More details

Additional articles

Versions

Often bought together

Sanding sponge siasponge block hard fineness coarse 98x69x26 mm

Sanding sponge 4-sided corundum grain 100 fine 68x100x26 mm

Sanding sponge medium grit/P60 90x100x5 aluminium oxide

Sanding sponge siasponge flex pad medium 120x98x13 mm

Sanding sponge siasponge combination block hard fineness fine 98x69x26 mm

Universal sanding block elast. rubber silicone-free gr. 60 coarse 80x50x20 mm

Sanding sponge siasponge block hard comb. fineness medium 98x69x26 mm

No workshop should be without it:

Countersink set 90° HSS TiAlN shape C uneven pitch 3 clamping surfaces d. 6.3-25.0 mm

Twist drill bit set HSS-E Co5 1-10 mm 0.5 mm incremental 19 pieces

Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H

ATORN flat square, stainless 150 x 100 mm in line with DIN 875 precision 1

LOCTITE LB 8040 rapid rust remover 400 ml

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 in box

ATORN HSSE machine tap set M3-12 HSSE DL

ATORN analogue scriber 600 mm with fine adjustment

Caramba high-performance PTFE 500 ml spray can

ATORN screwdriver set in workshop stand, 7 pieces

Twist drill bit set HSS-E Co5 1-13 mm 0.5 mm incremental 25 pieces

KNIPEX precision circlip pliers set, 8 pieces in box

Free-hand cutting disc, straight, universal line PSF STEELOX grit 60 125x1.0 mm

Cs. + cs. deburring tool set 6 pcs 90° HSS/TiN 6.3-20.5 mm in plastic box

ATORN cross-peen hammer 1,000 g with 3-component handle

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10 mm 0.5 in box

Safety goggles MAX C4 lens clear

ErgoStrip universal stripping tool 0.2-4.0 mm length 135 mm right-handed

Lamella flap disc Z SG POWER STEELOX, dia. 125 mm, alumina zirconia, 40 grit

T-handle 411 A RA T-handle

Blade scraper Argentax with extra wide handle replaceable blades

Long hexagon ball head pin wrench set 9 pcs in clip AF 1.5/2/2.5/3/4/5/6/8/10

Metal saw bow for 300 mm saw blade length

Wire-stripping pliers PreciStrip16 type 12 52 195

Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.

Pneumatic hose reel hose dia. 13 mm, hose length 15 m max. 20 bar

ATORN corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m

T-handle 416 RA T-handle Rapidaptor

Safety goggles MAX T7 lens clear

ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm

Cs. + cs. deburring tool set 6 pcs 90° HSS-E dia. 6.3-20.5 mm in metal box

ATORN 6-piece measuring instrument set, wooden case, digital vernier callipers

Twist drill bit set Sprint Master 25 pcs DIN 338 HSS D 1.0-13.0 mm in box

Set of flat hand engineer's files with handle, 5 pieces, L=200mm, German cut 2

ATORN connector set, 3 pieces, square output

Measuring cup set 3 pcs 0.5 l, 1.0 l, 2.0 l, transparent, coloured/raised scale

ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm

ATORN measuring and clamping vee blocks 80 mm w switch magnet, wooden case

ATORN A-View 1 safety glasses

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-10 mm 0.5 in box

WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade

ATORN A-Mech 4 assembly glove, size 9

Safety goggles MAX A1 lens clear

LOCTITE 243 threadlocker 50 g

ATORN countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-10.5 mm 0.5 and CHD

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 in box

ATORN A-Mech 2 assembly glove, size 9

Disposable safety knife SECUMAX 150

ATORN A-Shield 2 cut protection glove, size 9

ATORN A-Shield 1 cut protection glove, size 9

Protective vice jaw set 125 mm 8 pieces in bag

ATORN A-View 4 safety glasses

Cs. + cs. deburring tool set 6 pcs 90° HSS dia. 6.3-20.5 mm in plastic box

ATORN TX screwdriver set, 5 pcs, TX 10, 15, 20, 25, 30

ATORN A-View 5 full-vision safety goggles

ATORN dial gauges 10 mm range 0.01 scale, impact pr ex diam 58 mm

ATORN centre drill set HSS form A, D=1-1.6-2-2.5-3.15-4-5

Countersink set 90° HSS TiAlN shape C uneven pitch 3 clamping surfaces d. 6.3-20.5 mm

ATORN ret. ring pliers set, 8 pcs A1,A2,A11,A21,J1,J2,J11,J21 in roll-up pouch

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 and CHD

Prec. countersink set 5 pcs HSS-E Alunit d. 6.3/10.4/16.5/20.5/25.0 mm

ATORN VDE screwdriver set, 3 pcs, cross head PH 1-3

Industrial atomiser type R36.501 with 360° suction system