Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN test pin set, rust- and acid-resistant, TC1, 1-10 mm, in 0.1 mm increments

ATORN test pin set, rust- and acid-resistant, TC1, 1-10 mm, in 0.1 mm increments

ATORN test pin set, rust- and acid-resistant, TC1, 1-10 mm, in 0.1 mm increments
Item no: 1032643 201 

Online price:

Available in 4-6 working days.

Application
For measuring bore spacings, bore diameters, angularity of bores etc.

Execution
  • ground and lapped
  • hardened 58-62 HRC
  • Rust- and acid-resistant steel
  • Diameter from 0.300 to 0.999 mm with a length of 40 mm; diameter from 1.000 mm with a length of 70 mm
  • diameter from 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
  • diameter from 1.5 to 2.999 mm: One end with 30-45° chamfer; other end deburred with diameter marking on outer surface
  • diameter from 1.00 to 1.499 mm: One end with 30-45° chamfer; other end deburred without diameter marking
  • up to 0.999 mm: Both ends deburred, without diameter marking


Brand: ATORN
Min./max. diameter: 1.00-10.00 mm
Tolerance class: 1
Material: Stainless and acid proof steel
Length: 70 mm
Type: in 0.10 mm increments
Number of pieces in assortment/set: 91 PCS
Nominal dimension of measuring pins: 1.00-10.00 mm, increasing by 0.1 mm
Number of bins: 1
DIN: 2269

ATORN-No.: 33061283

EAN no.: 4066107102968

Product Datasheet
Keywords:

You might also be interested in this

  • ATORN test pin set, rust- and acid-resistant, TC1, 1-10 mm, in 0.5 mm increments
    524,40 €
  • Boring bar interchangeable head set E10
  •
    Boring bar interchangeable head set E12
  •
    Adapter with lock washer drive 1/4 inch square output 1/4 inch bit
  •
    ATORN Spiralbohrer VA HSSE DIN 345 MK 29 mm 130 Grad
  •
    Parallelschraubstock nach hinten aufgehend fest Backenbreite 125 mm
  •
    Hi-vis T-shirt PW3 orange/black class 2 size M
  •
    Claw jaw set SKB without fine adjustment, clamping depth over 2 mm, width 125 mm
  •
    Clamping lever f. boring bar PDUNR cat. no. 18526 and PDUNL cat. no. 18527
  •
    Household and work scissors stainless plastic handles 130 mm
  •
    Hi-vis T-shirt PW3 orange/black class 2 size XS
  •
    Sheath and wire-stripping tool, application range 4.8-7.5 mm, length 100 mm
Herstellerinformationen