Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN test pin set, rust- and acid-resistant, TC1, 1-10 mm, in 0.5 mm increments

ATORN test pin set, rust- and acid-resistant, TC1, 1-10 mm, in 0.5 mm increments

ATORN test pin set, rust- and acid-resistant, TC1, 1-10 mm, in 0.5 mm increments
Item no: 1032643 200 

Online price:

Available in 4-6 working days.

Application
For measuring bore spacings, bore diameters, angularity of bores etc.

Execution
  • ground and lapped
  • hardened 58-62 HRC
  • Rust- and acid-resistant steel
  • Diameter from 0.300 to 0.999 mm with a length of 40 mm; diameter from 1.000 mm with a length of 70 mm
  • diameter from 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
  • diameter from 1.5 to 2.999 mm: One end with 30-45° chamfer; other end deburred with diameter marking on outer surface
  • diameter from 1.00 to 1.499 mm: One end with 30-45° chamfer; other end deburred without diameter marking
  • up to 0.999 mm: Both ends deburred, without diameter marking


Brand: ATORN
Min./max. diameter: 1.00-10.00 mm
Tolerance class: 1
Material: Stainless and acid proof steel
Length: 70 mm
Type: in 0.5 mm increments
Number of pieces in assortment/set: 19 PCS
Nominal dimension of measuring pins: 1.00-10.00 mm, increasing by 0.5 mm
Number of bins: 1
DIN: 2269

ATORN-No.: 33061282

EAN no.: 4066107102951

Keywords:

You might also be interested in this

  • ATORN test pin set, rust- and acid-resistant, TC1, 1-10 mm, in 0.1 mm increments
  •
    DEGUSSIT triangular file, fine grit, 100x10 mm
  •
    Boring bar interchangeable head set E10
  •
    ATORN end mill, length 73 mm, shank 10 mm, cutting edge diameter 10 mm
  •
    Boring bar interchangeable head set E12
  •
    Set of flat hand engineer's files with handle, 5 pieces, length 200 mm, cut 3
  •
    1/2 inch reducers to 1/4 inch pack = 2 flexible plastic coolant hoses
    14,08 €
  • Straight edge, ground carbon steel, accuracy DIN 874/00, 500 mm, in case
  •
    Cantilever add-on rack double-sided IPE 140 4 cantilevers 2000x1000x1600 mm med.
  •
    1/4 inch hexagon socket 8790 HMA 13 mm with holding function
  •
    ATORN wedge clamping device with claws, including sliding block 40 x 15 mm M 8
  •
    ATORN flat square 500 x 330 mm in line with DIN 875 precision 1
Herstellerinformationen