Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 18 mm A=160 mm

ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 18 mm A=160 mm

ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 18 mm A=160 mm
Bild
Bild
Item no: 1021614 310 

Online price:

Still in stock: 1

Application
For clamping cutters and drills with straight shanks in h6 tolerance. Suitable for shrinking onto inductive contact and hot air devices.

Execution
  • Guarantees maximum concentricity < 0.003 mm
  • Heat-resistant and high-temperature tool steel 1,600-1,800 N/mm²
  • Hardness 52 + 2 HRC
  • Maximum coolant pressure 80 bar
  • Adjustment travel 10 mm, can be adjusted on both sides
  • Shrink grip and shrink release of carbide and HSS tools
  • 4 additional drill holes for fine balancing
  • With Balluff chip hole

Advantage
  • High positioning and repeat accuracy
  • Shrink-fit chuck ideal for high rotation speeds
  • Slim design, narrow interfering contour
  • Very high torque transfer
  • Extremely cost-effective

Delivery
1x SK40 shrink-fit chuck (ISO 7388-1)

Notes
The previous standard DIN 69871-1 was replaced by ISO 7388-1.
Vor dem Schrumpfvorgang bitte die Verschlussschrauben der Kühlkanalbohrungen entfernen.

Brand: ATORN
Tool holding device: SK 40
Clamping diameter (d): 18 mm
Projecting length (A): 160 mm
Tapered diameter (d2): 33 mm
Outer diameter (D): 42 mm
Clamp in depth (min. L2): 50 mm
Form: AD/AF
Concentricity tolerance: 0,003 mm
Suitable for thread (G): M12 x 1
Coolant supply: Internal
Balancing quality: G 2.5 at 25,000 rpm
DIN: 69871-1

ATORN-No.: 21041035

EAN no.: 4050293357684

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • Tiefenmessschraube 0-100mm 101,6x16mm mit 4 Verlängerungen
  •
    ATORN SK50 shrink-fit chuck (ISO 7388-1) dia. 32 mm A=160 mm
  •
    ATORN end mill for VCGT220530 32.0 mm, shank D=25.0 mm, T=2
  •
    ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 10 mm A=80 mm
  •
    Dig. workshop callipers 0-1,030 mm, lightweight, w. data output
  •
    Milling cutter holder medium with CCB DIN 69871 AD/B SK40 16 x 100 mm
  •
    ATORN shrink-fit chuck SK50 (ISO 7388-1) dia. 32 mm A=80 mm
  •
    ATORN milling cutter holder BT30 (ISO 7388-2) dia. 20 mm A=75 mm
  •
    Scotch-Brite fleece hand pad super fine grit 400-500 158 x 224 mm
  •
    ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 18 mm A=120 mm
  •
    ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 20 mm A=200 mm
  •
    Safety boots Ruhr Blue S3 size 44
Herstellerinformationen