Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN twist drill TLP HSS, MK 2, 15.0 mm x 245 mm x 147 mm, 130°

ATORN twist drill TLP HSS, MK 2, 15.0 mm x 245 mm x 147 mm, 130°

ATORN twist drill TLP HSS, MK 2, 15.0 mm x 245 mm x 147 mm, 130°
Item no: 1010613 108 

Online price:

Still in stock: 1

Application
Geometry with deep-hole profile for application up to a strength of 1000 N/mm².

Execution
Twist drill with deep-hole profile

Advantage
  • Deep-hole profile for optimised chip removal at greater drilling depths without venting
  • effective removal of chips thanks to large chipping spaces

Notes
chamfer nitrated < Ø16; steam treated > Ø16

Brand: ATORN
Material to be processed: Steel | Cast metal | Aluminium
Cutting material: HSS
Surface: Uncoated
Type: TLP
Angle of the tip: 130 Degree
DIN: 341
Tool holding device: Morse taper shank
Cutting edge diameter: 15 mm
Chip flute length: 147 mm
Length: 245 mm
Morse taper size: MK 2
f steel 1000: 0,19 mm/r

ATORN-No.: 10472671

EAN no.: 4050293035643

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • ATORN twist drill U4 HSSE, DIN 338, 4.9 mm x 86 mm x 52 mm, 118°
  •
    ATORN twist drill U4 HSSE, DIN 338, 3.9 mm x 75 mm x 43 mm, 118°
  •
    ATORN twist drill VA HSSE, DIN 345, MT 2, 23.0 mm x 253 mm x 155 mm, 130°
  •
    ATORN twist drill U4 HSSE, DIN 338, 5.9 mm x 93 mm x 57 mm, 118°
  •
    ATORN twist drill U4 HSSE, DIN 338, 4.6 mm x 80 mm x 47 mm, 118°
  •
    ATORN twist drill bit HSS type N DIN 1897 10.2 mm x 89 mm x 43 mm, 118°
  •
    ATORN twist drill U4 HSSE, DIN 338, 4.8 mm x 86 mm x 52 mm, 118°
  •
    Micro drill bit DIN 1899 type N HSS-E, ground 0.18 mm
  •
    ATORN twist drill TLP HSS, MK 2, 15.0 mm x 425 mm x 275 mm, 130°
  •
    ATORN twist drill U4 HSSE, DIN 338, 1.4 mm x 40 mm x 18 mm, 118°
  •
    ATORN twist drill U4 HSSE, DIN 338, 2.1 mm x 49 mm x 24 mm, 118°
  •
    ATORN twist drill U4 HSSE, DIN 338, 2.0 mm x 49 mm x 24 mm, 118°
Herstellerinformationen