RAKSO - Wire wool grade of fineness medium 1

Application
Wood: For sanding after priming and before applying the first paint layer. The natural grain pattern is greatly enhanced on textured woods.
Paint: Removes old paint layers from antique furniture in combination with paint stripper. Roughens old painted surfaces before applying new paint.
Metal: Cleans copper pipes and copper fittings before soldering. Removes stubborn dirt, surface rust, oil contamination and limescale deposits.
Cleaning: Ideal for removing dirt from garden furniture and blinds. Glass blocks and tiles are effectively cleaned without scratching.

Execution

Fine types numbers 0000, 000 and 00 can be used to smooth wood after staining, spruce up waxed woods with new wax, thoroughly and gently clean plastic blinds and garden furniture and polish aluminium, copper and brass
Medium types numbers 0, 1 and 2 can be used to smooth wood after priming, remove old paints using solvents, sand plasterboard, remove dirt residues from tiles and stone flooring and polish copper piping and fittings before soldering
Coarser types numbers 3, 4 and 5 can be used to enhance natural grain patterns in softwoods (pine, spruce), clean glazing and glass blocks and roughen old paint and coatings
Stark verschmutzte Oberflächen:
Zum Entfernen von Fett oder Öl von Oberflächen, besonders bei hartnäckigen Verschmutzungen.
Reinigung von Glasoberflächen / Fenstern:
Zur Beseitigung von hartnäckigen Ablagerungen wie Rost, Mineralien oder Schmutz von Glas.
ACHTUNG: Hierbei sollte jedoch eine sehr feine Stahlwolle (ab Feinheitsgrad gelb 00) verwendet werden, um das Glas nicht zu zerkratzen.

Advantage
RAKSO STEEL WOOL is available in nine varieties with a clear colour coding system: YELLOW is for fine types, ORANGE for medium types and RED for coarser types.

Notes
Beim Arbeiten mit Stahlwolle sind Schutzhandschuhe zu verwenden, da die feinen Drähte kleine Hautverletzungen verursachen können.
Zudem sollte man bei der Verwendung in feuchten Umgebungen darauf achten, dass keine Rostbildung auftritt, wenn die Stahlwolle in Kontakt mit Wasser kommt.

Wire wool grade of fineness medium 1

Wire wool grade of fineness medium 1

Description

Technical data

More details

Additional articles

Versions

No workshop should be without it:

Pliers set, 3 pcs Combination pliers, snipe nose pliers, side cutters

ATORN centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5

ATORN micrometer 0-25 mm, in case

Spiralbohrer-Satz Sprint Master 19tlg. DIN 338 HSS Ø 1,0-10,0 mm in Kassette

ATORN HSSE machine tap set M3-12 HSSE GL

ATORN A-View 3 safety glasses

Pneumatic micro die grinder 9032 M air consumption 75 l/min length 132 mm

Spray bottle refillable 227 ml max. operating pressure 8 bar 0.4 kg

Safety goggles MAX C4 lens clear

Caramba high-performance PTFE 500 ml spray can

Disposable safety knife SECUMAX 150

WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade

ATORN A-Shield 3 cut protection glove, size 9

ATORN PZ screwdriver set, 3 pcs, PZ 1-3, round blade

Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H

ATORN cross-peen hammer 1,000 g, hickory handle, nylon handle protect. sleeve

ATORN centre drill set HSSE TiALN form A, D=1-1.6-2-2.5-3.15-4-5

ATORN hexagon screwdriver set, ball head set, 5 pieces, 3–8 mm

ATORN 6-piece measuring instrument set, wooden case, digital vernier callipers

Measuring cup set 3 pcs 0.5 l, 1.0 l, 2.0 l, transparent, coloured/raised scale

Kegelsenker-Satz 90° HSS-TiAlN Form C ungl. Teilung 3 Spannflächen Ø 6,3-20,5 mm

ATORN A-Shield 2 cut protection glove, size 9

ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm

Kegelsenker-Satz 90° HSS-TiAlN Form C ungl. Teilung 3 Spannflächen Ø 6,3-25,0 mm

Industrial atomiser type R36.501 with 360° suction system

Set of flat hand engineer's files with handle, 5 pieces, L=200mm, German cut 2

Cs. + cs. deburring tool set 6 pcs 90° HSS-E dia. 6.3-20.5 mm in metal box

LOCTITE 243 threadlocker 50 g

ATORN HSSE machine tap set M3-12 HSSE DL

T-handle 416 RA T-handle Rapidaptor

ATORN corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m

ATORN VDE screwdriver set, 3 pcs, cross head PH 1-3

ATORN reusable corded ear plugs

ATORN hexagon screwdriver set, 9 pieces, 1.5–10 mm, with ball head, long

ATORN A-Mech 1 assembly glove, size 9

Pneumatic special oil 100 ml silicone-free with locking cap

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10.5 mm 0.5 and CHD

ATORN twist drill bit set N HSS TIN head DIN 338 1.0-10.0 mm in assortment case

ATORN countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank

Octagonal pin punch set 6 pieces dia. 2-8 mm in stand

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 and CHD

Adapter set 958/7

ATORN disposable ear plugs, 400 pairs

ATORN quick-change bit holder, 1/4 inch x 60 mm

ATORN countersink set, 90°, HSS, extremely unequal pitch 6.3-20.5mm, 3-flat shnk

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10 mm 0.5 in box

Pliers set, 3 pcs comb. pliers, side cutters, high-tech water pump pliers

ATORN flat square, stainless 150 x 100 mm in line with DIN 875 precision 1

Safety goggles MAX T7 lens clear

ATORN wooden folding rule, white 2 m EC class III, with angle scale

Pliers wrench 250 mm up to AF 52 mm 19x position box joint

ATORN cutter blade with 18-mm snap-off blade, metal housing, with slide

ATORN ear defenders, 37 dB

ATORN banded ear plugs, 32 dB

T-handle 411 A RA T-handle

ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm 3-flat shnk

ATORN vernier calipers IP67 electr. 150 mm depth gauge flat

ATORN cross-peen hammer 1,000 g with 3-component handle

ATORN A-View 4 safety glasses

ATORN NC machine reamer set, 3.0-12.0 mm, H7, HSSE

Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6

Hexagon screwdriver set 8 pieces 2-10 mm

ATORN dial gauge, 10 mm meas. diff. 0.01 mm graduation shock-res, dia. 58 mm

ATORN countersink set 90° HSS, extremely unequal pitch 6.3-20.5 mm

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 in box

Digitales Drehmoment Testgerät, 5- 500 Nm 3/4 + 3/8 + 1/2 + 1/4 Zoll

ATORN corundum abrasive fabric sheets (AO) G100 230 x 280 mm

ATORN steel cutting disc 125x1 mm

ATORN A-Mech 4 assembly glove, size 9

ATORN A-View 5 full-vision safety goggles

Inspektionskamera VideoPocket HD

ATORN A-Mech 22 assembly glove, size 9