Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Carbide hole saw with shank long design dia. 22 mm

Carbide hole saw with shank long design dia. 22 mm

Carbide hole saw with shank long design dia. 22 mm
Item no: 1040250 210 

Online price:

Still in stock: 1

Application
Especially developed for use on pipe material and curved surfaces, for unalloyed and alloyed steels, non-ferrous metals, plastics and GFRP.
For material thicknesses up to 4 mm (3/16 inch); stainless steel up to 2 mm (1/16 inch).
Recommended for use on hand drills up to max. diameter 40 mm (1.9/16 inch) or stationary machines.

Execution
  • The hole saw is manufactured from a single piece for diameters from 15.2 mm (3/16 inch) to 30.0 mm (1.1/8 inch)
  • A special hardened holder is used for diameters from 31.0 mm (1.3/16 inch) to absorb torsional forces under heavy load and thus avoid premature shearing of the drive arbor
  • Carbide-tipped
  • Tapered centre drill bit with pre- and post-cutter, replaceable

Advantage
  • High concentricity thanks to stable construction
  • CAD-optimised chip angles with special grinding surface ensure high cutting performance and long service life
  • Fast core removal by means of ejector spring
  • Carbide tips allow repeated regrinding
  • Repairable: Teeth can be replaced if they break

Delivery
1 hole saw
1 centre drill bit

Notes
When spot drilling pipes, drill with low contact pressure and avoid pendulum motions
For greater material thicknesses: Cut 2-3 mm (1/16-7/64 inch) in each work step, then remove the chips
A high-quality cutting oil should be used when sawing metals
Exceptions: Do not use cutting oil for cast iron and use petroleum instead of oil for aluminium
Note: Always wear safety goggles!
Special designs for special applications are available on request!

Brand: HHW
Diameter: 22 mm
Cutting material: Carbide
Cutting depth: 35 mm
Shank diameter: 10 mm

EAN no.: 4024496087464

Product Datasheet
Versions
loading
Keywords: Blechlocher,Lochsäge,Säge,Loch-,Zylindersäge,Hartmetall-Lochsäge,Lochsägen,Sägen,

You might also be interested in this

  • Verstellboden glatt BxTxH 1500x175x30mm 20kg RAL 7035
  • Multiplex indexable insert with chip breaker groove HSS-E-PM+Fire 21.50 mm
  • ATORN 1/2 inch screwdriver bit PH 2
  • ATORN machine tap HSSE HL VA, 6HX, 0 degrees, form B, M20
  • Sheath-stripping and wire-stripping tool length 130 mm
    27,95 €
  • 1/4 inch hexagon impact screwdriver bit DN 3129 CV special steel AF 6 mm
  • Measuring tool set, analogue callipers, 9 pcs
  • ATORN 3-way pyramid, incl. Easy Point, body height 92 mm
  • ATORN forward and reverse deburrer 90 degrees SC-TiAlN 2.9 mm short w. HA shaft
  • SC flat drill bit 180° AQUA DRILL EX Flat 3xD with cooling channel dia. 8.3 mm
  • Verstellboden glatt BxTxH 1500x175x30mm 20kg RAL 5012
  • Carbide hole saw with shank long design dia. 35 mm
Herstellerinformationen