Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Lever gauge probe with large MR 1.6 mm reading 0.01 mm housing dia. 30.0 mm

Lever gauge probe with large MR 1.6 mm reading 0.01 mm housing dia. 30.0 mm

Lever gauge probe with large MR 1.6 mm reading 0.01 mm housing dia. 30.0 mm
Bild
Bild
Item no: 1033260 201 

Online price:

Available in 6-8 working days.

Application
For measuring deviations in concentricity, axial run-out, parallelism and flatness. For centring borehole shafts and aligning workpieces.

Execution
  • Housing with hardened dovetail fixtures bolted on
  • High sensitivity, low measuring force
  • Automatic switching of probing direction
  • Measuring mechanism on ruby bearings
  • Mounted using dovetail or shank with dia. 4 mm

Advantage
  • Indicator contact point with 12° contact angle (The INTERAPID 312 are designed so that the measured value will be correct with no need for adjustment at a contact angle α of 12° between the indicator contact point and workpiece surface. For any other contact angle, including where the indicator contact point is parallel to the workpiece surface, the measured values must be corrected)
  • Monté sur queue d'aronde ou tige Ø 4 mm

Delivery
1x dial test indicator
1x plunger with contact point made of hardened steel (2 mm diameter)
1x case


Brand: TESA TECHNOLOGY
Length measuring range: 1,6 mm
Type: Standardausführung
Scale value: 0,01 mm
Diameter: 30 mm
Length of measuring sensor from centre of ball: 16,5 mm
Measurement force: 0,12 N
Connection thread: M1.7
Data transmission type: 0 - not applicable
Material of measuring ball: Steel
Ball diameter: 2 mm
Pivot range of measuring sensor: 210 Degree
Calibration Group: L

Manufacturer part no.: 074111367

EAN no.: 7630041119145

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • Lever gauge probe with large MR 1.6 mm reading 0.01 mm housing dia. 37.5 mm
  •
    Twist drill bit HSS-PM SG-coated 135° tip angle 3xD dia. 3.28 mm
  •
    Lever gauge probe measuring range 1 mm probe length 44.5 mm basic set
  •
    SC flat drill bit 180° AQUA DRILL EX Flat 3xD with cooling channel dia. 10.9 mm
  •
    ATORN lever gauge probe, 0.001 mm scale 0.2 mm measuring range, 40 mm
  •
    Solid carbide thread cutter pitch 1.0 M12 l=27.0 mm with I.C
  •
    ATORN 2-point internal micrometer, meas. range 50-150 mm, conn. thread M7 x 1
  •
    Lever gauge probe MarTest 800 S reading 0.01 mm measuring range 0.4 mm
  •
    NC spotting drill, solid carbide 120°, diameter 16 mm x 115 mm HB shaft
  •
    Flügeltür-Werkzeugschrank Acurado, H1200xB1200xT500mm RAL 7035/5010
  •
    Lever gauge probe standrd CC meas probe reading/MR 0.01/0.5mm housing dia. 40mm
  •
    3/4 inch torque wrench ratchet with R/L operation setting range 160-800 Nm
Herstellerinformationen