Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN test pin set rust- and acid-resistant TC1 6.01-7.0mm, in 0.01mm increments

ATORN test pin set rust- and acid-resistant TC1 6.01-7.0mm, in 0.01mm increments

ATORN test pin set rust- and acid-resistant TC1 6.01-7.0mm, in 0.01mm increments
Item no: 1032643 209 

Online price:

Available in 4-6 working days.

Application
For measuring bore spacings, bore diameters, angularity of bores etc.

Execution
  • ground and lapped
  • hardened 58-62 HRC
  • Rust- and acid-resistant steel
  • Diameter from 0.300 to 0.999 mm with a length of 40 mm; diameter from 1.000 mm with a length of 70 mm
  • diameter from 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
  • diameter from 1.5 to 2.999 mm: One end with 30-45° chamfer; other end deburred with diameter marking on outer surface
  • diameter from 1.00 to 1.499 mm: One end with 30-45° chamfer; other end deburred without diameter marking
  • up to 0.999 mm: Both ends deburred, without diameter marking


Brand: ATORN
Min./max. diameter: 6.01-7.00 mm
Tolerance class: 1
Material: Stainless and acid proof steel
Length: 70 mm
Type: in 0.01 mm increments
Number of pieces in assortment/set: 100 PCS
Nominal dimension of measuring pins: 6.01-7.00 mm, increasing by 0.01 mm
Number of bins: 1
DIN: 2269

ATORN-No.: 33061291

EAN no.: 4066107103040

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN test pin set rust- and acid-resistant TC1 8.01-9.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 4.01-5.0mm, in 0.01mm increments
  •
    Long-Life E-CUT saw blade 50x35 mm 3 piece/pack for MultiMaster cat. no. 91575
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 338 118° tip angle 5xD dia. 4.0 mm
  •
    ATORN SC torus mill cttr short TiAlSiN 5x6x57 mm clearance 4.7x16 mm R 0.5 mm
    69,52 €
  • Blind hole screw tap SGSP spiral-fluted 45° HSS-PM-SG 3xD DIN 376 shape C 6H M16
  •
    ATORN 90° ang. milling cutter w. shaft Ø 20.0 mm/2 tooth for ind ins AD.X 1204..
  •
    Reducing sleeve OCA32-25
  •
    ATORN test pin set rust- and acid-resistant TC1 7.01-8.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 2.01-3.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 3.01-4.0mm, in 0.01mm increments
  •
    Quick-change holder type WBW size 3/40 f revolving hd RD/3 + UD/3 cat. no. 21870
Herstellerinformationen