FAHRION - Collet chuck Centro P 16 DIN 69893 A HSK63 A=160 clamping range 1-10 mm

Application
For clamping tools with straight shanks without any loss of concentricity or clamping force, up to a shaft tolerance of h10, for economic machining of individual and series parts with extremely high-precision machining results.

Execution

Clamping forces are evenly distributed across the entire cylindrical shell surface and perfect surfaces are achieved through the optimally absorbed radial forces
System concentricity of 3 µm with Fahrion HP/HPD collet no. 23323
30° trapezoidal thread with ground and extra-long double guide
Precise centring of the clamping nut
The collet is completely surrounded in the chuck cone for optimum stability and even distribution of the clamping forces
The HPD collets can be used for internal cooling, no. 23360-916-941

Advantage

Ideal for HPC and HSC machining
Resistant to temperature fluctuations
With special easy glide coating for lower friction
Very good damping properties

Delivery
Without clamping nut (can be ordered separately, art. no. 1021509), without stop screw.

Notes
Collet chucks with square drive for screw taps cannot be used. For clamping nuts and spanners, see art. no. 1021509. For sealing washers, see art. no. 1021513 (only available online). GERC-HP/HPD/HPDD collet chucks, see art. nos. 1021546-1021569. For coolant tube, see art. no. 1021864. For keys for coolant tubes, see art. no. 1021865.

Brand: FAHRION
Tool holding device: HSK 63
Size: CP 16
Form: A
Collet type: ER 16 (426 E)
Min./max. clamping range: 1.0-10.0 mm
Outer diameter (D): 30,0 mm
Projecting length (A): 160,0 mm
Insertion depth (E): 106,0 mm
Coolant supply: Internal
Balancing quality: G 2.5 at 25,000 rpm
Construction length: Long
Max. concentricity: 0,003 mm

Collet chuck Centro P 16 DIN 69893 A HSK63 A=160 clamping range 1-10 mm

Collet chuck Centro P 16 DIN 69893 A HSK63 A=160 clamping range 1-10 mm

Description

Technical data

More details

Additional articles

Versions

No workshop should be without it:

Measuring cup set 3 pcs 0.5 l, 1.0 l, 2.0 l, transparent, coloured/raised scale

Funnel set 6 pieces dia. 50, 75, 100, 120, 150, 160 mm polyethylene

ATORN HSSE machine tap set M3-12 HSSE DL

Hexagon screwdriver set 8 pieces 2-10 mm

ATORN connector set, 3 pieces, square output

Safety goggles MAX C4 lens clear

Cs. + cs. deburring tool set 6 pcs 90° HSS/TiN 6.3-20.5 mm in plastic box

Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.

ATORN corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m

Long hexagon ball head pin wrench set 9 pcs in clip AF 1.5/2/2.5/3/4/5/6/8/10

ErgoStrip universal stripping tool 0.2-4.0 mm length 135 mm right-handed

Digitales Drehmoment Testgerät, 5- 500 Nm 3/4 + 3/8 + 1/2 + 1/4 Zoll

Twist drill bit set Sprint Master 25 pcs DIN 338 HSS D 1.0-13.0 mm in box

ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm

T-handle 411 A RA T-handle

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 and CHD

Countersink set 90° HSS TiAlN shape C uneven pitch 3 clamping surfaces d. 6.3-20.5 mm

Twist drill bit set Sprint Master 19 pcs DIN 338 HSS D 1.0-10.0 mm in box

Prec. countersink set 5 pcs HSS-E Alunit d. 6.3/10.4/16.5/20.5/25.0 mm

ATORN A-Mech 4 assembly glove, size 9

Blade scraper Argentax with extra wide handle replaceable blades

T-handle 416 RA T-handle Rapidaptor

Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6

ATORN cross-peen hammer 1,000 g with 3-component handle

ATORN flat square, stainless 150 x 100 mm in line with DIN 875 precision 1

Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H

TX® screwdriver set 9 pieces T10-50

ATORN twist drill bit set N HSS TiN head DIN 338 1.0-13.0 mm 0.5 in box

ATORN disposable ear plugs, 200 pairs

Countersink set 90° HSS TiAlN shape C uneven pitch 3 clamping surfaces d. 6.3-25.0 mm

Pocket tape measure 411 Vario EG I tape width 13 mm length 3 m

ATORN quick-change bit holder, 1/4 inch x 60 mm

ATORN disposable ear plugs, 400 pairs

LOCTITE LB 8040 rapid rust remover 400 ml

ATORN ear defenders, 33 dB

ATORN wooden folding rule, white 2 m EC class III, with angle scale

Set of flat hand engineer's files with handle, 5 pieces, L=200mm, German cut 2

ATORN A-Shield 2 cut protection glove, size 9

Tabletop scales type FCE 15 K5 w/LC display reading 5g max. weighing range 15kg

ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm 3-flat shnk

Pneumatic special oil 100 ml silicone-free with locking cap

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 in box

Octagonal pin punch set 6 pieces dia. 2-8 mm in stand

ATORN NC machine reamer set, 3.0-12.0 mm, H7, HSSE

ATORN A-Shield 4 cut protection glove, size 9

ATORN corundum abrasive fabric sheets (AO) G100 230 x 280 mm

Industrial atomiser type R36.501 with 360° suction system

Metal saw bow for 300 mm saw blade length

ATORN A-Mech 2 assembly glove, size 9

Multiclean cleaning cloth roll 1000 pcs 34x37 cm 2 ply blue perforated absorbent

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 and CHD

ATORN ret. ring pliers set, 8 pcs A1,A2,A11,A21,J1,J2,J11,J21 in roll-up pouch

Safety goggles MAX A1 lens clear

Caramba high-performance PTFE 500 ml spray can

Disposable safety knife SECUMAX 150

ATORN centre drill set HSS form A, D=1-1.6-2-2.5-3.15-4-5

ATORN reusable corded ear plugs

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10.5 mm 0.5 and CHD

ATORN HSSE machine tap set M3-12 HSSE GL

ATORN 1/4 inch hexagon socket with flexible blade

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 in box

ATORN twist drill bit set N HSS-TiN head DIN 338 1.0-10.0 mm in assortment case

ATORN screwdriver set in workshop stand, 7 pieces

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10 mm 0.5 in box

ATORN countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank

ATORN cutter blade with 18-mm snap-off blade, metal housing, with slide

Safety goggles MAX T7 lens clear

ATORN VDE screwdriver set, 3 pcs, cross head PH 1-3

ATORN banded ear plugs, 32 dB

Spray bottle refillable 227 ml max. operating pressure 8 bar 0.4 kg

Lamella flap disc LSZ-F Vision zirconia alumina grain 60 dia. 125 mm

Pneumatic micro die grinder 9032 M air consumption 75 l/min length 132 mm