Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Taper sleeve DIN 69893 A HSK diameter 63 MT3 for automatic tool change

Taper sleeve DIN 69893 A HSK diameter 63 MT3 for automatic tool change

Taper sleeve DIN 69893 A HSK diameter 63 MT3 for automatic tool change
Bild
Bild
Item no: 1021846 103 

Online price:

Available in 8-10 working days.

Application
For mounting Morse taper tools with flat tangs. For machine tools with automatic tool change.

Execution
Hollow shank taper with gripper groove, concentricity between the taper and internal cone less than or equal to 0.008 mm. Pre-balanced according to G 6.3 - 15,000 rpm


Brand: HHW
Mount, on tool side (MK): MK 3
Projecting length (A): 140,0 mm
Outer diameter (D): 40,0 mm
Tool holding device: HSK A63
Coolant supply: Internal
Max. concentricity: 0,008 mm

EAN no.: 4024496064724

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN triangular solid scraper 200 mm chrom-van. DIN 8350 B
  • ATORN reducing sleeve dia. 12 mm/dia. 6 mm for IC
  • ATORN 1/2 inch socket for external TX E 11
  • Kabelbinder Polyamid innenverzahnt 200x4,8 mm Pack=100 St., natur
  • ATORN machine thread former IC HSSE-PM Carbo DIN 374 MF16 x 1.5 mm ISO 3 3xD
  • Sweatshirt petrol size 5XL
  • Hand tap set 2 pieces DIN 2181 HSS UNF no. 12
  • Copper hammer with 3-component handle length 320 mm 750 g
  • ATORN corundum abrasive fabric roll (AO) in tear-off box G240 40 mm x 50 m
  • ATORN HPC drill and plunge end mill, 8x19x26x63, T3, HA shank, ULTRA-coated
  • Rust remov. Rust off IND spr. can 500 ml
  • Short twist drill bit DIN 338 type H HSS, ground 4.9 mm
Herstellerinformationen