Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN surface chuck (Weldon) SK50 diameter 20 mm A=63 mm

ATORN surface chuck (Weldon) SK50 diameter 20 mm A=63 mm

ATORN surface chuck (Weldon) SK50 diameter 20 mm A=63 mm
Bild
Bild
Item no: 1021630 518 

Online price:

Available in 8-10 working days.

Application
For clamping tools with straight shank and clamping surface in accordance with DIN 1835 B.

Execution
  • Alloyed case-hardening steel, core tensile strength at least 950 N/mm²
  • Case-hardened HRc 60 ± 2 (HV 700 ± 50), hardness depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. concentricity < 0.005 mm
  • With ring groove and plastic edge protection ring on the pull stud
  • Functional surfaces precision-ground, all other surfaces black-oxide
  • With Balluff chip hole

Advantage
Precision cross-hatch pattern on the contact surface for maximum accuracy

Delivery
1x SK40 or SK50 surface chuck (Weldon) (DIN2080)

Notes
The previous standard DIN 69871-1 was superseded by ISO 7388-1.

Brand: ATORN
Tool holding device: SK 50
Clamping diameter (d): 20 mm
Projecting length (A): 63 mm
Outer diameter (D): 52 mm
Balancing quality: G 2.5 at 25,000 rpm

ATORN-No.: 22661271

EAN no.: 4050293714647

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN flat files, 100 x 8 mm, fine, silicon carbide
  •
    ATORN twist drill bit VA HSSE TiAlNplus DIN 1897 diameter 4.8 mm
  •
    Low-cut safety shoe AER55 Impulse Black Blue Low S1P ESD size 37
  •
    ATORN surface chuck (Weldon) SK40 diameter 14 mm A=50 mm
  •
    ATORN surface chuck (Weldon) SK50 diameter 18 mm A=63 mm
  •
    Multiplex HPC pilot plate SC/ALTiN for girder size 130 dia. 13.8 mm
  •
    WERA torque screwdriver T 15 set to 3.0 Nm, fixed blade
  •
    ATORN thread milling cutter SC-TIAlN 1 mm 4.0 mm 14.5 mm
  •
    1/4 inch internal TX® screwdriver bit CVD-TiN-coated T 30
  •
    Flachsenker ZS 180° Typ U HM Z4 2/53,0
  •
    SC end mill TiSiN HA shank 45° Z3 short diameter 14
  •
    ATORN twist drill bit VA HSSE TiAlNplus DIN 1897 diameter 4.9 mm
Herstellerinformationen