Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 4 mm A=200 mm

ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 4 mm A=200 mm

ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 4 mm A=200 mm
Bild
Bild
Item no: 1021605 401 

Online price:

Available in 5-7 working days.

Application
For clamping milling tools and drill bits with h6 shaft tolerance. Suitable for inductive, contact and hot air shrinking devices.

Execution
  • Shrink grip and shrink release of carbide and HSS tools
  • Hardness 52 + 2 HRC
  • Maximum coolant pressure 80 bar
  • 4 additional drill holes for fine balancing
  • With Balluff chip hole
  • Glass bead blasted

Advantage
  • Slim design, extremely low interference contour
  • High transmittable torques
  • High positioning and repeat accuracy
  • Ideal for high rotation speeds

Delivery
1x SK40 shrink-fit chuck 3° (ISO 7388-1)

Notes
The previous standard DIN 69871-1 was superseded by ISO 7388-1.

Brand: ATORN
Tool holding device: SK 40
Clamping diameter (d): 4 mm
Projecting length (A): 200 mm
Tapered diameter (d2): 10 mm
Outer diameter (D): 20 mm
Max. clamp in depth (max. L2): 28 mm
Form: AD/AF
Concentricity tolerance: 0,003 mm
Max. adjustment travel (max. V): 10 mm
Width across flats: 3 mm
Suitable for thread (G): M6
Coolant supply: Internal
Balancing quality: G 2.5 at 25,000 rpm
DIN: 69871-1

ATORN-No.: 21044787

EAN no.: 4050293408768

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN hexagon socket 26 mm 1/2 inch DIN 3124
  •
    ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 6 mm A=200 mm
  •
    ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 14 mm A=160 mm
  •
    ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 5 mm A=160 mm
  •
    ATORN interch. jaw grips soft 95x40x60 mm 1.5 mmx60° M12 hole spacing 25 mm
  •
    ATORN cutting disc for steel/cast iron - type A30S-BF, 125x2.5x22.23 mm
  •
    ATORN bit E6.3 PH 3 x 90 mm
  •
    ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 8 mm A=120 mm
  •
    Twist drill bit HSS-PM SG-coated 135° tip angle 3xD dia. 6.20 mm
  •
    ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 10 mm A=80 mm
  •
    ATORN milling cutter holder BT50 (ISO 7388-2) dia. 20 mm A=80 mm
  •
    ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 5 mm A=120 mm
Herstellerinformationen