Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 6 mm A=120 mm

ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 6 mm A=120 mm

ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 6 mm A=120 mm
Bild
Bild
Item no: 1021605 206 

Online price:

Available in 5-7 working days.

Application
For clamping milling tools and drill bits with h6 shaft tolerance. Suitable for inductive, contact and hot air shrinking devices.

Execution
  • Shrink grip and shrink release of carbide and HSS tools
  • Hardness 52 + 2 HRC
  • Maximum coolant pressure 80 bar
  • 4 additional drill holes for fine balancing
  • With Balluff chip hole
  • Glass bead blasted

Advantage
  • Slim design, extremely low interference contour
  • High transmittable torques
  • High positioning and repeat accuracy
  • Ideal for high rotation speeds

Delivery
1x SK40 shrink-fit chuck 3° (ISO 7388-1)

Notes
The previous standard DIN 69871-1 was superseded by ISO 7388-1.

Brand: ATORN
Tool holding device: SK 40
Clamping diameter (d): 6 mm
Projecting length (A): 120 mm
Tapered diameter (d2): 12 mm
Outer diameter (D): 22 mm
Max. clamp in depth (max. L2): 36 mm
Form: AD/AF
Concentricity tolerance: 0,003 mm
Max. adjustment travel (max. V): 10 mm
Width across flats: 2.5 mm
Suitable for thread (G): M5
Coolant supply: Internal
Balancing quality: G 2.5 at 25,000 rpm
DIN: 69871-1

ATORN-No.: 21044767

EAN no.: 4050293408560

Product Datasheet
Versions
loading
Keywords:

[Text nicht gefunden]

  • ATORN shrink-fit chuck SK50 (ISO 7388-1) dia. 32 mm A=80 mm
    498,82 €
  • ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 25 mm A=120 mm
  • ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 14 mm A=120 mm
  • ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 8 mm A=200 mm
  • ATORN shrink-fit chuck with KKB (ISO 7388-1) diameter 20 mm A=120 mm
  • ATORN SK50 surface chuck (ISO 7388-1), dia. 14 mm, A=63 mm coolant bore
  • ATORN SK50 surface chuck (ISO 7388-1), dia. 18 mm, A=63 mm coolant bore
  • ATORN milling cutter holder BT40 (ISO 7388-2) dia. 10 mm A=32 mm
  • ATORN milling cutter holder BT30 (ISO 7388-2) dia. 20 mm A=75 mm
  • ATORN milling cutter holder BT50 (ISO 7388-2) dia. 10 mm A=63 mm
  • ATORN interch. jaw grips soft 90x50x60 mm 1.5 mmx60° M12 hole spacing 26 mm
  • Crimping pl. PZ 16 forced lock f. wire end ferrules DIN 46228 T1+4 dia. 6-16 mm
Herstellerinformationen