Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Carbide int. corner lathe chisel DIN 4974/ISO 9 right set. angle 88° P10 10 Q

Carbide int. corner lathe chisel DIN 4974/ISO 9 right set. angle 88° P10 10 Q

Carbide int. corner lathe chisel DIN 4974/ISO 9 right set. angle 88° P10 10 Q
Item no: 1018865 209 

Online price:

Still in stock: 8

Execution
  • Carbide lathe chisel DIN 4974
  • Right
  • Approach angle 88°
  • With soldered ISO cutting edges in accordance with DIN 4950
  • Cutting edges carbide-tipped.


Brand: ---
Shank width: 10 mm
Shaft height: 10 mm
Length: 150 mm
Min. bore diameter: 18 mm
Carbide type: P10
Cutting direction: Right-hand cutting
Cutting material: Carbide
DIN: 4974
Shank type: Square
Suitable for material group H: 0 - not applicable
Suitable for material group K: 2
Suitable for material group M: 2
Suitable for material group N: 2
Suitable for material group P: 1

EAN no.: 4030456142494

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN test pin set, gauge steel, TK1, 5.05-10.00 mm in 0.05 mm increments
  •
    ATORN shrink-fit chuck with KKB SK40 (ISO 7388-1) diameter 18 mm A=80 mm
  •
    Comb. wrench set with ring ratchet 6 pieces AF 8/10/12/13/17/19 mm
  •
    Precision round file with fine tip length 100 mm cut 1
    20,20 €
  • ATORN HPC reamer, SC TiAlN, T=4 0° 4.02mm 0-0.004mm x 75mm x 12mm HA (steel)
  •
    ATORN test pin set, gauge steel, TK2, 9.01-10.00 mm in 0.01 mm increments
  •
    ATORN shrink-fit chuck with KKB SK40 (ISO 7388-1) diameter 10 mm A=120 mm
  •
    ATORN shrink-fit chuck with KKB SK40 (ISO 7388-1) diameter 16 mm A=120 mm
  •
    FixGRIP adapter 1/2 in drive x 3/4 in output chrome-plated chrome-alloy steel
  •
    ATORN test pin set, gauge steel, TK2, 1.00-10.00 mm in 0.01 mm increments
  •
    Carbide int. corner lathe chisel DIN 4974/ISO 9 right set. angle 88° M20 12 Q
  •
    ATORN shrink-fit chuck with KKB SK40 (ISO 7388-1) diameter 25 mm A=120 mm
Herstellerinformationen