Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN SC milling cutter for foam diameter 8.0 mm 100 x 40 x 70 mm t=3

ATORN SC milling cutter for foam diameter 8.0 mm 100 x 40 x 70 mm t=3

ATORN SC milling cutter for foam diameter 8.0 mm 100 x 40 x 70 mm t=3
Item no: 1016908 107 

Online price:

Available in 4-6 working days.

Application
For milling, recessing and contour milling of foams, especially PE and PUR

Execution
  • Solid carbide ultra-fine grain
  • Straight shank in line with DIN 6535 HA
  • with clearance
  • with protective chamfer
  • uncoated
  • Surface polished

Advantage
  • Steep spiral for good chip removal
  • Optimum surfaces for pocket milling


Brand: ATORN
Cutting material: SC
Surface: Uncoated
Type: W
Number of cutting edges (Z): 3 PCS
Twist angle: 15°
Tool holding device: HA parallel shank
Construction length: Long
Cutting edge diameter: 8 mm
Cutting edge length: 40 mm
Clearance length: 70 mm
Length: 100 mm
Edge protection chamfer length: 0,05 mm
Shank diameter: 8 mm
fz aluminium: 0,096 mm
Overall stainless steel suitability: 3
fitness not iron total: 1
fitness Titan/Nickel/Super total: 3

ATORN-No.: 10440625

EAN no.: 4050293438826

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • Dial gauge water-oil-tight IP 67 read. 0.01 mm fact. st. MR 10 mm dia. 61.5 mm
  •
    ATORN SC milling cutter for foam diameter 6.0 mm 100 x 40 x 70 mm t=3
  •
    Sorbent roll 0.40x40 m, pack=2 pieces, extra absorbent 300 g/m2
  •
    GSA 1300 PCE sabre saw stroke rate 0-2,900 rpm saw stroke 28 mm 1,300 W 4.1 kg
  •
    ATORN solid carbide end mill T4 long HA, 10.0 x 30 x 38 x 80mm, coated
  •
    1/2 inch Zyklop TX® screwdriver bit 9 pieces T 20/25/27/30/40/45/50/55/60
  •
    ATORN mini cutting insert ATL 5.0mm R0.2 L15 HW5615
  •
    Hooded shirt Atlanta navy size L
  •
    ATORN SC end mill T=3 HA 10.0x25x33x73 mm, coated, with edge protection chamfer
  •
    ATORN SC HSC end mill - G/CFRP diameter 10.0 mm W0 degrees L:72x25 t:5 d10
  •
    Brochure holder DIN A3 height x width 330 x 440 mm anthracite
  •
    ATORN shrink-fit chuck HSK63 (ISO 12164) 6 mm A=70 mm
Herstellerinformationen