Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN SC multi-tooth mill, long diameter 16.0 x 57 x 85 x 125 mm, T=8 RT52

ATORN SC multi-tooth mill, long diameter 16.0 x 57 x 85 x 125 mm, T=8 RT52

ATORN SC multi-tooth mill, long diameter 16.0 x 57 x 85 x 125 mm, T=8 RT52
Item no: 1016825 108 

Online price:

Still in stock: 3

Application
Multi-tooth mill for circumferential machining, fine finishing and semi-roughing up to 52 HRC.

Execution
  • Solid carbide ultra-fine grain
  • Centre cutting
  • Edge protection chamfer
  • HA shank pursuant to DIN 6535
  • Cutting edge finish
  • With clearance
  • Type N
  • Chip angle 3°
  • RockTec 52-coated

Advantage
  • Excellent chip removal and temperature resistance
  • Maximum service life thanks to RockTec 52 coating


Brand: ATORN
Cutting material: SC
Surface: RockTec 52
Type: N
Number of cutting edges (Z): 8 PCS
Twist angle: 50°
Tool holding device: HA parallel shank
Construction length: Long
Cutting edge diameter: 16 mm
Cutting edge length: 57 mm
Clearance length: 85 mm
Length: 125 mm
Edge protection chamfer length: 0,3 mm
Clearance diameter: 15 mm
Shank diameter: 16 mm
fz steel 1300: 0,1 mm
Overall stainless steel suitability: 3
fitness not iron total: 3
fitness Titan/Nickel/Super total: 3

ATORN-No.: 11860297

EAN no.: 4050293196368

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN SC multi-tooth mill, long diameter 16.0 x 57 x 85 x 125 mm, T=8 RT65
  •
    ATORN SC milling cutter for foam diameter 8.0 mm 150 x 40 x 115 mm t=3
  •
    Keyway cutter cyl./1835 B DIN 850 D, 12 cutting edges HSS-E 32.5 x 10 mm
  •
    ATORN solid carbide end mill, standard, diameter 8.0 x 20 x 30 x 64 mm, T=4 RT65
  •
    ATORN SC end mill standard diameter 6.0 x 16 x 20 x 50 mm T=4 RT52
  •
    Keyway cutter cyl./1835 B DIN 850 D, 12 cutting edges HSS-E 45.5 x 10 mm
  •
    ATORN SC HSC single-tooth milling cutter diameter 12.0 mm W0° 83 x 30 t=1 d=12h6
  •
    Flachsenker ZS 180° Typ U HM Z3 1/24,5
  •
    ATORN SC multi-tooth mill, long diameter 10.0 x 45 x 60 x 100mm T=6 RT65
  •
    ATORN SC multi-tooth mill, long diameter 10.0 x 45 x 60 x 100mm T=6 RT52
  •
    ATORN solid carbide end mill, standard, diameter 6.0 x 16 x 20 x 50 mm, T=4 RT65
  •
    Articulated face wrench with pin dia. 4 mm pin width 18-40 mm
Herstellerinformationen