Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN solid carbide end mill, X-long diameter 3.0 x 5 x 60 x 100 mm, T=4 RT65

ATORN solid carbide end mill, X-long diameter 3.0 x 5 x 60 x 100 mm, T=4 RT65

ATORN solid carbide end mill, X-long diameter 3.0 x 5 x 60 x 100 mm, T=4 RT65
Item no: 1016813 301 

Online price:

Still in stock: 3

Application
End mill, extra long, with short cutters for machining materials up to 65 HRC, e.g. in dip cutting and mould construction.

Execution
  • Solid carbide ultra-fine grain
  • Cutting edge finish
  • HA shank in accordance with DIN 6535
  • With clearance
  • Type H
  • Chip angle -6°
  • RockTec 65-coated

Advantage
  • Excellent chip removal and temperature resistance
  • Maximum service life thanks to RockTec 65 coating


Brand: ATORN
Cutting material: SC
Surface: RockTec 65
Type: H
Number of cutting edges (Z): 4 PCS
Twist angle: 40°
Tool holding device: HA parallel shank
Construction length: Extra long
Cutting edge diameter: 3 mm
Cutting edge length: 5 mm
Clearance length: 60 mm
Length: 100 mm
Clearance diameter: 2,8 mm
Shank diameter: 6 mm
fz hard 52 HRC: 0,018 mm
Overall stainless steel suitability: 3
fitness not iron total: 3
fitness Titan/Nickel/Super total: 3

ATORN-No.: 11860598

EAN no.: 4050293198683

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • T-slot cutter cyl./1835 B DIN 851, type N 8 cutting edges HSS-E 20x36 mm
  • ATORN SC mini torus milling cutter, long, Ø 0.4 x 0.6 x 2 x 50 mm r0.03 T2 RT65
  • T-slot cutter cyl./1835 B DIN 851, type N 8 cutting edges HSS-E 16x28 mm
  • ATORN solid carbide end mill, X-long, diameter 5.0 x 9 x 60 x 100 mm, T=4 RT52
  • ATORN SC radius cutter, extra-long diameter 3.0 x 5 x 30 x 100 mm T=2 RT65
  • ATORN SC mini torus milling cutter, long, Ø 0.4 x 0.6 x 2 x 50 mm r0.03 T2 RT52
  • ATORN SC mini torus milling cutter, long, Ø 0.4 x 0.6 x 5 x 50 mm r0.03 T2 RT52
  • ATORN SC mini torus milling cutter, long, Ø 0.6 x 0.9 x 4 x 50 mm r0.05 T2 RT52
  • ATORN SC end mill standard diameter 12.0 x 25 x 37 x 75 mm T=4 RT52
  • ATORN collet set ER40 HP (4-26 mm) 5 µm in wooden case
  • ATORN SC mini torus milling cutter, long, Ø 2.0 x 3.0 x 8 x 50 mm r0.2 T2 RT65
  • TX clamping screws for cat. no. 10649 ff, pack=5 pieces M 4.0 x 15, T 20
Herstellerinformationen