Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN RockTec PRO mini end mill, long neck 1.8x2.7x8x45 mm T=2 HA

ATORN RockTec PRO mini end mill, long neck 1.8x2.7x8x45 mm T=2 HA

ATORN RockTec PRO mini end mill, long neck 1.8x2.7x8x45 mm T=2 HA
Bild
Bild
Bild
Item no: 1016802 583 

Online price:

Still in stock: 3

Application
Mini end mill with a long neck for machining materials up to 65 HRC, e.g. in die and mould making.

Execution
  • Ultra Micro fine grain cutting material
  • Cutting edge finish
  • HA shank in line with DIN 6535
  • with clearance
  • Type H
  • With RockTec PRO coating

Advantage
  • optimum chip removal and temperature resistance
  • optimised geometry for machining hard materials
  • maximum service life due to RockTec PRO coating


Brand: ATORN
Cutting material: SC
Surface: RockTec PRO
Type: H
Number of cutting edges (Z): 2 PCS
Twist angle: 30°
Tool holding device: HA parallel shank
Construction length: Normal
Cutting edge diameter: 1,8 mm
Cutting edge length: 2,7 mm
Clearance length: 8 mm
Length: 45 mm
Clearance diameter: 1,71 mm
Shank diameter: 4 mm
fz hard 65 HRC: 0,018 mm
Overall stainless steel suitability: 3
fitness not iron total: 3
fitness Titan/Nickel/Super total: 3

ATORN-No.: 11264748

EAN no.: 4066107032999

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

[Text nicht gefunden]

  • Short step drill bit type N cyl. HSS ground M8 180° 9 x 15.0 mm
    86,49 €
  • Square end mill str. DIN 327 D type N short 2 cut edg Z-cut HSS-E 2.8 mm
  •
    Square end mill str. DIN 327 D type N short 2 cut edg Z-cut HSS-E 6.5 mm
  •
    Bohrnutenfräser zyl. DIN 844 B Typ N kurz 3 Schn. Z-Schnitt HSS-E 7,5 mm
    16,97 €
  • ATORN RockTec PRO mini end mill, long neck 0.3x0.4x3x45 mm T=2 HA
  •
    ATORN RockTec PRO mini end mill, long neck 0.6x0.9x6x45 mm T=2 HA
  •
    Pocket tape rule Vario 411 rust-proof EC II belt width 13 mm length 3 m
  •
    ATORN smooth steel wire pipe brush 44 mm, width 1/2 inch, length 160 mm
  •
    Internal cleaning brush with M6 thread, INOX wire, dia. 10mm, L=120mm, crimped
  •
    Electronics Phillips screwdriver PH 0/60 mm
  •
    Weld release agent Eco Bio Weld spray can 500 ml
  •
    Floor marking colour Traffic Extra white 500 ml can
Herstellerinformationen