Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN RockTec PRO mini end mill, long neck 0.2x0.3x1x45 mm T=2 HA

ATORN RockTec PRO mini end mill, long neck 0.2x0.3x1x45 mm T=2 HA

ATORN RockTec PRO mini end mill, long neck 0.2x0.3x1x45 mm T=2 HA
Bild
Bild
Bild
Item no: 1016802 502 

Online price:

Still in stock: 5

Application
Mini end mill with a long neck for machining materials up to 65 HRC, e.g. in die and mould making.

Execution
  • Ultra Micro fine grain cutting material
  • Cutting edge finish
  • HA shank in line with DIN 6535
  • with clearance
  • Type H
  • With RockTec PRO coating

Advantage
  • optimum chip removal and temperature resistance
  • optimised geometry for machining hard materials
  • maximum service life due to RockTec PRO coating


Brand: ATORN
Cutting material: SC
Surface: RockTec PRO
Type: H
Number of cutting edges (Z): 2 PCS
Twist angle: 30°
Tool holding device: HA parallel shank
Construction length: Normal
Cutting edge diameter: 0,2 mm
Cutting edge length: 0,3 mm
Clearance length: 1 mm
Length: 45 mm
Clearance diameter: 0,18 mm
Shank diameter: 4 mm
fz hard 65 HRC: 0,003 mm
Overall stainless steel suitability: 3
fitness not iron total: 3
fitness Titan/Nickel/Super total: 3

ATORN-No.: 11264667

EAN no.: 4066107032180

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • ATORN RockTec PRO mini end mill, long neck 1.8x2.7x8x45 mm T=2 HA
  •
    ATORN mini cutting insert AIL 6.0mm L18 18 UN HC5640
  •
    ATORN RockTec PRO mini end mill, long neck 0.5x0.7x2x45 mm T=2 HA
  •
    ATORN RockTec PRO mini end mill, long neck 0.4x0.6x2x45 mm T=2 HA
  •
    ATORN RockTec PRO mini end mill, long neck 0.3x0.4x2x45 mm T=2 HA
    58,96 €
  • ATORN RockTec PRO mini end mill, long neck 0.8x1.2x2x45 mm T=2 HA
    54,56 €
  • ATORN solid carbide end mill T4 long HA, 4.0 x 16 x 22 x 62 mm, coated
  •
    ATORN RockTec PRO mini end mill, long neck 1.5x2.3x4x45 mm T=2 HA
  •
    Electronics Phillips screwdriver PZ 0/60 mm
    5,21 €
  • Square end mill str. DIN 327 D type N short 2 cut edg Z-cut HSS-E 6.5 mm
  •
    Pocket tape rule Vario 411 rust-proof EC II belt width 13 mm length 3 m
  •
    ATORN RockTec PRO mini end mill, long neck 0.6x0.9x3x45 mm T=2 HA
Herstellerinformationen