Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN SC end mill D 8.0 x 20 x 30 x 64mm, HB shaft 4 cutting edges, ULTRA MS

ATORN SC end mill D 8.0 x 20 x 30 x 64mm, HB shaft 4 cutting edges, ULTRA MS

ATORN SC end mill D 8.0 x 20 x 30 x 64mm, HB shaft 4 cutting edges, ULTRA MS
Item no: 1016404 208 

Online price:

Available in 4-6 working days.

Application
End mill for machining stainless steel, titanium alloy, nickel and copper alloys.

Execution
  • ultra-fine grain cemented carbide
  • HB straight shank
  • with clearance
  • high-performance ULTRA MS layer
  • defined cutting edge rounding
  • centre cutting

Advantage
  • optimised, positive cutting geometry
  • optimum chip removal and temperature resistance
  • maximum service life thanks to ULTRA MS coating


Brand: ATORN
Cutting material: SC
Surface: ULTRA MS
Type: VA
Number of cutting edges (Z): 4 PCS
Twist angle: 40°
Tool holding device: HB parallel shank
Construction length: Normal
Cutting edge diameter: 8 mm
Cutting edge length: 20 mm
Clearance length: 30 mm
Length: 64 mm
Clearance diameter: 7,4 mm
Shank diameter: 8 mm
fz stainless steel: 0,036 mm
Overall stainless steel suitability: 1
fitness not iron total: 3
fitness Titan/Nickel/Super total: 1

ATORN-No.: 11861023

EAN no.: 4050293359473

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • ATORN TC hammer drill bit T=4, 12.0 mm x 310 mm x 250 mm, suitable for SDS-plus
  •
    ATORN SC end mill D 8.0 x 20 x 30 x 64mm, HA shaft 4 cutting edges, ULTRA MS
  •
    ATORN SC TiAlSiN HPC hard drill 5xD 18.0 mm x 18 mm x 143 mm, HA shaft, no IC
  •
    ATORN SC end mill D 10.0 x 22 x 32 x 70mm, HA shaft 3 cutting edges, ULTRA MS
  •
    ATORN SC end mill D 4.0 x 12 x 20 x 50mm, HA shaft 4 cutting edges, ULTRA MS
  •
    ATORN solid carbide end mill T2 HA, 16.0 x 32 x 42 x 92 mm, coated
  •
    ATORN solid carbide end mill T3 HA, 4.0 x 12 x 18 x 57 mm, coated
  •
    ATORN HPC reamer, SC TiALN, T=4 B, 7-8° 4.5mm H7 x 75mm x 12mm HA (steel)
  •
    ATORN hand tap MS HSSE-PM nitrided D 352 0° M4 0.7 mm ISO2 x D/S 3xD
  •
    ATORN solid carbide end mill T4 HA, 8.0 x 16 x 25 x 63 mm, coated
  •
    ATORN TC hammer drill bit T=4, 14.0 mm x 310 mm x 250 mm, suitable for SDS-plus
  •
    ATORN solid carbide end mill T3 HA, 12.0 x 28 x 39 x 84 mm, plain
Herstellerinformationen