Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN 180° high-performance drill, SC TiAlN, 5xD 3.2 mm x 6 mm x 66 mm

ATORN 180° high-performance drill, SC TiAlN, 5xD 3.2 mm x 6 mm x 66 mm

ATORN 180° high-performance drill, SC TiAlN, 5xD 3.2 mm x 6 mm x 66 mm
Bild
Bild
Bild
Bild
Bild
Item no: 1011100 109 

Online price:

Available in 4-6 working days.

Application
For producing drill holes with a 180° hole base in one operation

Execution
Heavy-duty solid carbide drill with 180° precision grinding and drill heels

Advantage
  • drilling and counterboring in a single work step at high cutting speed
  • Innovative geometry ensures good chip removal

Notes
The maximum permissible inclination of the drilling surface is 15° correction factor = 0.25
For spot drilling, multiply feed f [mm/U] by correction factor Kf
  • Spot drill with reduced feed until the tool cuts to 0.25xD over the total ø

  • For angled spot drilling: Retract at double feed rate f [mm/U]

  • After spot drilling at reduced feed rate (correction factor), drilling continues at feed rate f [mm/U] according to recommended cutting data without correction factors

  • Setting a pilot hole is recommended for drilling on flat surfaces.


Brand: ATORN
Material to be processed: Universal use
Cutting material: SC
Surface: TiAlN
Max. drilling depth (D): 5xD
Angle of the tip: 180 Degree
Coolant supply: Internal
Tool holding device: HA parallel shank
Cutting edge diameter: 3,2 mm
Shank diameter: 6 mm
Chip flute length: 28 mm
Length: 66 mm
f steel 1000: 0,08 mm/r
Edge protection chamfer length: 0,16 mm

ATORN-No.: 12040473

EAN no.: 4050293447026

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • 1/2 inch push-through square for reversible toothed ratchet cat. no. 51503 101
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 3.5 mm x 6 mm x 66 mm
  •
    Quadruple prism parallel piece accuracy DIN876/1, 75x150x130 mm
  •
    ATORN high-perf. drill, SC TiAlN 180° 3xD 4.1 mm x 6 mm x 66 mm
  •
    Jet Air flat nozzle individual for Jet Air cat. no. 75006 101
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 3.3 mm x 6 mm x 66 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 7.8 mm x 8 mm x 91 mm
  •
    Drawer fixture centre rails+dividers ser. 70/705 mod. 705 H 75 mm
  •
    3/4 inch push-through square for reversible toothed ratchet cat. no. 51584 201
  •
    Long twist drill bit DIN 340 type FS HSS ground 5.5 mm
  •
    ATORN twist drill N HSS, DIN 1869, 5.0 mm x 250 mm x 200 mm, 118°
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 3.1 mm x 6 mm x 66 mm
Herstellerinformationen