Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Long twist drill bit DIN 341 type N HSS ground MK1 13 mm

Long twist drill bit DIN 341 type N HSS ground MK1 13 mm

Long twist drill bit DIN 341 type N HSS ground MK1 13 mm
Item no: 1010610 135 

Online price:

Available in 6-8 working days.

Application
For drilling through boring bushings and for drilling deep holes. For drilling steel and cast steel (alloyed and unalloyed), cast iron, malleable iron, spheroidal graphite iron, sinter iron, nickel silver and graphite up to approx. 900 N/mm² strength.

Execution
  • With Morse taper and flat tangs
  • Right-cutting
  • Tip angle 118°
  • Cone polished section
  • Steam treated
  • HSS, ground


Brand: HARTNER
Material to be processed: Steel
Cutting edge diameter: 13 mm
Length: 215 mm
Chip flute length: 134 mm
Angle of the tip: 118 Degree
Cutting material: HSS
Surface: Vaporised
Morse taper size: MK 1
Type: N
DIN: 341
f steel 700: 0,20 mm/r
Coolant supply: 0 - not applicable
Number of cutting edges: 1 PCS
Max. f in cast iron: 0,15 mm/r
Max. f in steel: 0,20 mm/r
Min. f in cast iron: 0,15 mm/r
Min. f in steel: 0,20 mm/r
Shank style: Morse taper

Manufacturer part no.: 82210 13

EAN no.: 4031096043905

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

[Text nicht gefunden]

  • Twist drill bit HSS-PM SG-coated 118° tip angle 3xD dia. 1.36 mm
  •
    Trousers MOTION TEX LIGHT black size 58
  •
    Trousers IconiQ black/anthracite sz. 54
  •
    EINLIPPEN-TIEFLOCHBOHRER E80 30XD MIT TICN VHM-KOPF GERADE HA Ø 9,5
    213,00 €
  • VHM-Gewindefräser Steigung 1,75 mm M 12 l=20,1 mm
  •
    1/2 inch internal TX® screwdriver bit CV steel size T 27x55 mm
  •
    1/2 inch internal TX® screwdriver bit CV steel size T 27x55 mm
  •
    POLINOX® non-woven abrasive silicon carbide 40x20 mm shank dia. 6 mm grit 280
  •
    1/2 inch hexagon socket DIN 3124 CV steel AF 22 mm
  •
    Pin punch set colour powder-coated 3/4/5/6/8/10 mm L=150 mm shank dia. 10 mm
    53,37 €
  • ATORN thread mill cutter Z1, sub-prof, sol carb TiALN from Tr9, pitch1.5, D5.5mm
  •
    ATORN thr. mill. cutt., SC-TIAlN TH/BH 2xD 9.0 mm 1.75 mm 73 mm HA hard
Herstellerinformationen