Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 5.8x140x205 mm

Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 5.8x140x205 mm

Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 5.8x140x205 mm
Bild
Video
Item no: 1010425 058 

Online price:

Available in 6-8 working days.

Application
For drilling deep holes under difficult conditions. For steel up to 1200 N/mm² and cast iron. Drilling in increments, without chip removal up to 15xD!

Execution
  • Straight shank
  • Right-cutting
  • Special flute geometry
  • Helix angle 34°
  • DIN 1869-1
  • HSSE Co8, ground AG(AlCr) coating

Notes
Note the respective length/diameter ratio of the bore diameter and the flute length. Use only high-precision tool chucks!

Brand: NACHI
Material to be processed: Steel | Cast metal
Cutting edge diameter: 5,8 mm
Length: 205 mm
Chip flute length: 140 mm
Max. drilling depth (D): 15xD
Angle of the tip: 118 Degree
Cutting material: HSSE Co8
Surface: AlCrN
Tool holding device: Cylinder shank
Type: AGPLSD
DIN: 1869
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f steel 1000: 0,150 mm/r

Manufacturer part no.: L6540P 5.8X205

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 8.3x165x240 mm
  • Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 8.4x165x240 mm
  • ATORN collet ER40 HP dia. 16.5 mm (16.5-16.0 mm) concentricity 5 µm
  • Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 5.5x140x205 mm
  • Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 8.0x165x240mm
  • ATORN HPC POWER SC groove end mill, UNI, 4.0 x 5 x 8 x 54 mm HA, type N, short
  • ATORN twist drill HSSE-V3 TiAlN 3XD 9.1 x 10 mm x 84 mm
  • Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 4.6x125x185 mm
  • ATORN HPC POWER SC groove end mill, UNI, 4.0 x 5 x 8 x 54 mm HB, type N, short
  • Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 2.7x100x150 mm
  • Twist drill bit HSS-E-Co8 AG-coated DIN 1869-1 tip 118° 15xD dia. 2.5x95x140 mm
  • Twist drill bit HSS-E-Co8 AG coat. DIN 1869-1 tip 118° 15xD dia. 3.8x120x175 mm
Herstellerinformationen