Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.5 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.5 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.5 mm
Bild
Video
Item no: 1010424 095 

Online price:

Available in 6-8 working days.

Application
For drilling deep holes under difficult conditions. For steel up to 1200 N/mm² and cast iron. Drilling in increments, without removing chips!

Execution
  • Straight shank
  • Right-cutting
  • Special flute geometry
  • Helix angle 34°
  • HSSE Co8, ground AG(AlCr) coating

Notes
Note the respective length/diameter ratio of the bore diameter and the flute length. Use only high-precision tool chucks!

Brand: NACHI
Material to be processed: Steel | Cast metal
Cutting edge diameter: 9,5 mm
Length: 151 mm
Chip flute length: 107 mm
Angle of the tip: 118 Degree
Cutting material: HSSE Co8
Surface: AlCrN
Tool holding device: Cylinder shank
Type: AGPSLSD
DIN: 339
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f steel 1000: 0,240 mm/r
Min. f in steel: 0,180 mm/r
Max. f in steel: 0,280 mm/r
Min. f in cast iron: 0,320 mm/r
Max. f in cast iron: 0,320 mm/r

Manufacturer part no.: L6538 9,50

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 5.8 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 8.5 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 5.7 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.7 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 12.0 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 8.6 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.9 mm
  •
    Hexagon pin wrench long similar to ISO 2936L arm length 101 x 18 mm AF 2.0 mm
  •
    Extra-long twist drill bit DIN 1869 type FN HSS ground 7x370 mm
  •
    ATORN screw tap HSSE C 376 0° M24 3.0 mm ISO2 D 3xD hand P
  •
    ATORN combination shell end mill arbour HSK63 (ISO 12164) dia. 27 mm A=130 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.5 mm
Herstellerinformationen