Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.3 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.3 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.3 mm
Bild
Video
Item no: 1010424 093 

Online price:

Available in 6-8 working days.

Application
For drilling deep holes under difficult conditions. For steel up to 1200 N/mm² and cast iron. Drilling in increments, without removing chips!

Execution
  • Straight shank
  • Right-cutting
  • Special flute geometry
  • Helix angle 34°
  • HSSE Co8, ground AG(AlCr) coating

Notes
Note the respective length/diameter ratio of the bore diameter and the flute length. Use only high-precision tool chucks!

Brand: NACHI
Material to be processed: Steel | Cast metal
Cutting edge diameter: 9,3 mm
Length: 151 mm
Chip flute length: 107 mm
Angle of the tip: 118 Degree
Cutting material: HSSE Co8
Surface: AlCrN
Tool holding device: Cylinder shank
Type: AGPSLSD
DIN: 339
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f steel 1000: 0,240 mm/r
Min. f in steel: 0,180 mm/r
Max. f in steel: 0,280 mm/r
Min. f in cast iron: 0,320 mm/r
Max. f in cast iron: 0,320 mm/r

Manufacturer part no.: L6538 9,30

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.6 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 5.1 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.7 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.2 mm
  •
    ATORN metal circ saw blade, SC, coarse tooth, 15 mm x 1 mm x 5 mm, B T=20
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.4 mm
  •
    Short twist drill bit DIN 338 type FS HSS-E+TiN, 1.6 mm
    4,11 €
  • ATORN SC torus milling cutter, diamond-coated 3.0x60mm R=0.5mm DIN 6535 HA Z=2
  •
    ATORN STEP DRILL type N HSS TiN head DIN 338 diameter 2.00 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.8 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.2 mm
  •
    Multi-twist drill bit 5xD DIN 338 HSS ground 4.5 mm
Herstellerinformationen