Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.0 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.0 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.0 mm
Bild
Video
Item no: 1010424 090 

Online price:

Available in 6-8 working days.

Application
For drilling deep holes under difficult conditions. For steel up to 1200 N/mm² and cast iron. Drilling in increments, without removing chips!

Execution
  • Straight shank
  • Right-cutting
  • Special flute geometry
  • Helix angle 34°
  • HSSE Co8, ground AG(AlCr) coating

Notes
Note the respective length/diameter ratio of the bore diameter and the flute length. Use only high-precision tool chucks!

Brand: NACHI
Material to be processed: Cast metal | Steel
Cutting edge diameter: 9 mm
Length: 151 mm
Chip flute length: 107 mm
Angle of the tip: 118 Degree
Cutting material: HSSE Co8
Surface: AlCrN
Tool holding device: Cylinder shank
Type: AGPSLSD
DIN: 339
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f steel 1000: 0,240 mm/r
Min. f in steel: 0,180 mm/r
Max. f in steel: 0,280 mm/r
Min. f in cast iron: 0,320 mm/r
Max. f in cast iron: 0,320 mm/r

Manufacturer part no.: L6538 9,00

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Multi-step drill bit DIN 8376 type N cyl. HSS ground 180° M4, 4.5 x 8 mm
  •
    ATORN SC HSC 3D roughing cutter diameter 20.0x25x104 mm, T3, r=2 mm, HA shaft
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.8 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.3 mm
  •
    Hand protection cream REMO TEC 100 ml tube
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.0 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 2.4 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.7 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 8.9 mm
  •
    Twist drill bit DIN 345 type N tip angle 118° up to approx. 800 N/mm2 HSS 11 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 338 118° tip angle 5xD dia. 12.1 mm
  •
    ATORN ultra-slim BT30 hydraulic exp. chuck (ISO 7388-2) dia. 12 mm A=85 mm, IC
Herstellerinformationen