Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.4 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.4 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.4 mm
Bild
Video
Item no: 1010424 064 

Online price:

Still in stock: 2

Application
For drilling deep holes under difficult conditions. For steel up to 1200 N/mm² and cast iron. Drilling in increments, without removing chips!

Execution
  • Straight shank
  • Right-cutting
  • Special flute geometry
  • Helix angle 34°
  • HSSE Co8, ground AG(AlCr) coating

Notes
Note the respective length/diameter ratio of the bore diameter and the flute length. Use only high-precision tool chucks!

Brand: NACHI
Material to be processed: Steel | Cast metal
Cutting edge diameter: 6,4 mm
Length: 124 mm
Chip flute length: 86 mm
Angle of the tip: 118 Degree
Cutting material: HSSE Co8
Surface: AlCrN
Tool holding device: Cylinder shank
Type: AGPSLSD
DIN: 339
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f steel 1000: 0,200 mm/r
Min. f in steel: 0,152 mm/r
Max. f in steel: 0,240 mm/r
Min. f in cast iron: 0,264 mm/r
Max. f in cast iron: 0,264 mm/r

Manufacturer part no.: L6538 6,40

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.6 mm
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 5.4 mm
  • Hand tap DIN 2181 F third tap HSS MF 9x1
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 8.0 mm
  • ATORN CPGW 05T102 AVC,neutral clearance angle 11 degrees uncoated ap 0.01–1.3 mm
  • ATORN twist drill VA HSSE, DIN 340, 3.6 mm x 112 mm x 73 mm, 130°
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 7.4 mm
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.7 mm
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.7 mm
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.9 mm
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 5.0 mm
    32,32 €
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.0 mm
Herstellerinformationen