Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.0 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.0 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.0 mm
Bild
Video
Item no: 1010424 030 

Online price:

Still in stock: 7

Application
For drilling deep holes under difficult conditions. For steel up to 1200 N/mm² and cast iron. Drilling in increments, without removing chips!

Execution
  • Straight shank
  • Right-cutting
  • Special flute geometry
  • Helix angle 34°
  • HSSE Co8, ground AG(AlCr) coating

Notes
Note the respective length/diameter ratio of the bore diameter and the flute length. Use only high-precision tool chucks!

Brand: NACHI
Material to be processed: Steel | Cast metal
Cutting edge diameter: 3 mm
Length: 79 mm
Chip flute length: 51 mm
Angle of the tip: 118 Degree
Cutting material: HSSE Co8
Surface: AlCrN
Tool holding device: Cylinder shank
Type: AGPSLSD
DIN: 339
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f steel 1000: 0,100 mm/r
Min. f in steel: 0,057 mm/r
Max. f in steel: 0,084 mm/r
Min. f in cast iron: 0,105 mm/r
Max. f in cast iron: 0,105 mm/r

Manufacturer part no.: L6538 3,00

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • ATORN metal circ saw blade, SC, coarse tooth, 20 mm x 2 mm x 5 mm, B T=20
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.8 mm
    22,11 €
  • ATORN twist drill HSSE-V3 TiAlN 5XD 7.8 x 8 mm x 117 mm
    43,24 €
  • Pneumatic ratchet wrench 1/2 inch 9022P-1 max. torque 95 Nm length 330 mm
    171,27 €
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.3 mm
    19,68 €
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.4 mm
  • Short twist drill bit DIN 338 type N HSS precision roll forged 5.2 mm
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.8 mm
  • ATORN metal circ saw blade, SC, finely toothed, 20 mm x 4 mm x 5 mm A T=24
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 5.4 mm
    38,39 €
  • Twist drill bit HSS-E-Co8 AG-coated DIN 338 118° tip angle 5xD dia. 12.0 mm
  • Through hole screw tap MF DIN 374 40° shape C 2.5xD HSS-E MF3x0.35
    10,54 €
Herstellerinformationen