Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 2.8 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 2.8 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 2.8 mm
Bild
Video
Item no: 1010424 028 

Online price:

Available in 6-8 working days.

Application
For drilling deep holes under difficult conditions. For steel up to 1200 N/mm² and cast iron. Drilling in increments, without removing chips!

Execution
  • Straight shank
  • Right-cutting
  • Special flute geometry
  • Helix angle 34°
  • HSSE Co8, ground AG(AlCr) coating

Notes
Note the respective length/diameter ratio of the bore diameter and the flute length. Use only high-precision tool chucks!

Brand: NACHI
Material to be processed: Steel | Cast metal
Cutting edge diameter: 2,8 mm
Length: 79 mm
Chip flute length: 51 mm
Angle of the tip: 118 Degree
Cutting material: HSSE Co8
Surface: AlCrN
Tool holding device: Cylinder shank
Type: AGPSLSD
DIN: 339
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f steel 1000: 0,072 mm/r
Min. f in steel: 0,057 mm/r
Max. f in steel: 0,084 mm/r
Min. f in cast iron: 0,105 mm/r
Max. f in cast iron: 0,105 mm/r

Manufacturer part no.: L6538 2,80

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Shrink-fit chuck slim DIN 69871 shape AD SK40 extra-long D16x163mm stain.steel
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 6.8 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 338 118° tip angle 5xD dia. 10.0 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.6 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 4.4 mm
  •
    Blind hole screw tap MF DIN 374 40° shape C 2.5xD HSS-E MF16x1.00
  •
    Blind hole screw tap MF DIN 374 40° type C 2.5xD HSS-E MF10x1.25
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 4.7 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 3.7 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.3 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 10.0 mm
  •
    Multi-step drill bit DIN 8374 type N cyl. HSS ground 90° M5, 5.5 x 11 mm
Herstellerinformationen