Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.3 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.3 mm

Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 1.3 mm
Bild
Video
Item no: 1010424 013 

Online price:

Available in 6-8 working days.

Application
For drilling deep holes under difficult conditions. For steel up to 1200 N/mm² and cast iron. Drilling in increments, without removing chips!

Execution
  • Straight shank
  • Right-cutting
  • Special flute geometry
  • Helix angle 34°
  • HSSE Co8, ground AG(AlCr) coating

Notes
Note the respective length/diameter ratio of the bore diameter and the flute length. Use only high-precision tool chucks!

Brand: NACHI
Material to be processed: Steel | Cast metal
Cutting edge diameter: 1,3 mm
Length: 52 mm
Chip flute length: 30 mm
Angle of the tip: 118 Degree
Cutting material: HSSE Co8
Surface: AlCrN
Tool holding device: Cylinder shank
Type: AGPSLSD
DIN: 339
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f steel 1000: 0,046 mm/r
Min. f in steel: 0,032 mm/r
Max. f in steel: 0,056 mm/r
Min. f in cast iron: 0,066 mm/r
Max. f in cast iron: 0,066 mm/r

Manufacturer part no.: L6538 1,30

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 5.1 mm
  •
    Short twist drill bit DIN 338 type W HSS ground 5.4 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 4.8 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 9.4 mm
  •
    1/2 inch bi-hexagon socket DIN 3124 31CrV3 AF 14 mm
  •
    ATORN metal circ saw blade, SC, finely toothed, 20 mm x 4 mm x 5 mm A T=24
  •
    ATORN SC mini torus mill cttr TiAlSiN 2x2x75 mm clearance 1.91x40 mm R 0.3 mm
  •
    Twist drill bit HSS-E-Co8 AG-coated DIN 338 118° tip angle 5xD dia. 10.8 mm
  •
    ATORN solid carbide roughing cutter T3 HA, 20.0 x 41 x 52 x 104 mm, coated
  •
    Twist drill bit HSS-PM SG-coated 118° tip angle 3xD dia. 1.15 mm
  •
    Shelf impact protection size XXL height 600 mm for support width 111-120 mm
    97,15 €
  • Twist drill bit HSS-E-Co8 AG-coated DIN 339 118° tip angle 10xD dia. 8.9 mm
Herstellerinformationen