Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN twist drill TLP HSS-TiN, DIN 340, 7.5 mm x 156 mm x 102 mm, 130°

ATORN twist drill TLP HSS-TiN, DIN 340, 7.5 mm x 156 mm x 102 mm, 130°

ATORN twist drill TLP HSS-TiN, DIN 340, 7.5 mm x 156 mm x 102 mm, 130°
Item no: 1010410 175 

Online price:

Still in stock: 6

Application
Geometry with deep-hole profile for application up to a strength of 1000 N/mm².

Execution
Twist drill with deep-hole profile

Advantage
  • Deep-hole profile to optimise chip removal at greater drilling depths without venting
  • effective removal of chips thanks to large chipping spaces

Delivery
Packaging unit: drill Ø 1.0-6.0 mm = 10 pieces (price per piece)


Brand: ATORN
Material to be processed: Steel | Cast metal | Aluminium
Cutting material: HSS
Surface: TiN
Type: TLP
Self-centring: Yes
Tool holding device: HA parallel shank
Cutting edge diameter: 7,5 mm
Angle of the tip: 130 Degree
Chip flute length: 102 mm
Length: 156 mm
f steel 700: 0,14 mm/r
DIN: 340

ATORN-No.: 10472062

EAN no.: 4050293030174

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Economy roll magazine for 5 rolls with roll width 25-50 mm length 50 m
  • ATORN twist drill TLP HSS-TiN, DIN 340, 7.2 mm x 156 mm x 102 mm, 130°
  • ATORN twist drill N HSS TiALN DIN 1897 2.20 mm x 40 mm x 13 mm 118 degrees
  • Economy roll holder (tear-off holder) f. rolls w. width 25-50 mm length 50 m
  • ATORN twist drill TLP HSS-TiN, DIN 340, 6.8 mm x 156 mm x 102 mm, 130°
  • ATORN twist drill TLP HSS-TiN, DIN 340, 6.9 mm x 156 mm x 102 mm, 130°
  • ATORN twist drill TLP HSSE, DIN 1897, 7.4 mm x 74 mm x 34 mm, 130°
  • ATORN M3-M12 screw tap set M3-M12 TH/BH 2.5xD 40° UNI
  • ATORN twist drill TLP HSS-TiN, DIN 340, 7.8 mm x 165 mm x 109 mm, 130°
  • ATORN twist drill TLP HSS-TiN, DIN 340, 8.2 mm x 165 mm x 109 mm, 130°
  • ATORN twist drill TLP HSSE, DIN 1897, 9.4 mm x 84 mm x 40 mm, 130°
  • Cutting insert TDC 5 H 20 chip former C 2 cutting edges for cat. no. 18710-24
Herstellerinformationen