Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Short twist drill bit DIN 338 type H HSS, ground 9.5 mm

Short twist drill bit DIN 338 type H HSS, ground 9.5 mm

Short twist drill bit DIN 338 type H HSS, ground 9.5 mm
Item no: 1010210 176 

Online price:

Still in stock: 1

Application
Special drill bit with wide, spacious chip flutes for hard, brittle, short-chipping materials.

Execution
  • Brass drill bits
  • Straight shank
  • Right-cutting
  • Cone polished section
  • Side chip angle 12°–16°
  • HSS, ground


Brand: HARTNER
Material to be processed: Brass
Cutting edge diameter: 9,5 mm
Length: 125 mm
Chip flute length: 81 mm
Max. drilling depth (D): 5xD
Angle of the tip: 118 Degree
Cutting material: HSS
Surface: Uncoated
Tool holding device: Cylinder shank
Type: H
DIN: 338
Coolant supply: External
Cutting direction: Right-hand cutting
Number of cutting edges: 2 PCS
f aluminium: 0,17 mm/r
Min. f in non-ferrous metals: 0,14 mm/r
Max. f in non-ferrous metals: 0,22 mm/r

Manufacturer part no.: 81020 9,5

EAN no.: 4031096052365

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Compression collet chuck type ER 32 4537E shank diameter 16.0 mm, square 12.0 mm
  •
    Twist drill bit DIN 345 type N HSS+TiN ground 14.5 mm
  •
    Long twist drill bit DIN 340 type FS HSS ground 3.4 mm
  •
    Short twist drill bit DIN 338 type H HSS ground 7.9 mm
  •
    Short twist drill bit DIN 338 type H HSS, ground 4.6 mm
  •
    Long twist drill bit DIN 340 type FS HSS ground 4.0 mm
  •
    ATORN carbide bur, 6 mm, ZYAS 1020.06 STEEL TC cut STEEL
  •
    Short twist drill bit DIN 338 type H HSS, ground 4.4 mm
  •
    Short twist drill bit DIN 338 type H HSS, ground 3.1 mm
  •
    Annular cutter cutting depth 50 mm Weldon shank 19 mm HSS-Co BX dia. 19 mm
  •
    Long twist drill bit DIN 340 type FW HSS ground 3.4 mm
  •
    ATORN end mill PM TiAlN, teeth = 4, 16.0 mm, type HR, DIN 1835B long shank
Herstellerinformationen