Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN twist drill TLP HSSE, DIN 338, type GS, 6.1 mm x 101 mm x 63 mm, 130°

ATORN twist drill TLP HSSE, DIN 338, type GS, 6.1 mm x 101 mm x 63 mm, 130°

ATORN twist drill TLP HSSE, DIN 338, type GS, 6.1 mm x 101 mm x 63 mm, 130°
Item no: 1010050 255 

Online price:

Available for immediate delivery

Application
Geometry with deep-hole profile for application up to a strength of 1300 N/mm².

Execution
Twist drill with deep-hole profile

Advantage
  • Deep-hole profile for optimised chip removal at greater drilling depths without venting
  • effective removal of chips thanks to large chipping spaces

Delivery
Packaging unit: drill Ø 1.0-6.0 mm = 10 pieces (price per piece)

Notes
Chamfer-nitrated >2.36

Brand: ATORN
Material to be processed: Universal use
Cutting material: HSSE
Surface: Uncoated
Type: TLP
Self-centring: Yes
Tool holding device: HA parallel shank
Cutting edge diameter: 6,1 mm
Angle of the tip: 130 Degree
Chip flute length: 63 mm
Length: 101 mm
f steel 700: 0,11 mm/r
DIN: 338

ATORN-No.: 10483329

EAN no.: 4050293428315

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Pneumatic turbine straight grinder type ST 100 at 100,000 rpm
  •
    ATORN end mill for ind. inserts IC T=5 32.0 x 95mm shaft DIN =25.0mm DIN 1835B
    208,25 €
  • ATORN end mill for ind. inserts IC T=4 30.0 x 95mm shaft DIN =25.0mm DIN 1835B
  •
    End mill cyl. DIN 844 B type W long 3 cutting edges centre-cutting HSS-E 18 mm
    73,39 €
  • End mill cyl. DIN 844 B type W long 3 cutting edges centre-cutting HSS-E 14 mm
    47,64 €
  • ATORN end mill for indexable inserts IC T=2 16.0 x 85mm shaft D=16.0mm DIN 1835B
    120,53 €
  • ATORN end mill for indexable inserts IC T=1 12.0 x 80mm shaft D=16.0mm DIN 1835B
  •
    ATORN end mill for ind. inserts IC T=4 28.0 x 95mm shaft DIN =25.0mm DIN 1835B
  •
    ATORN twist drill X HSSE-PM TIN, DIN 338, 1.7 mm x 43 mm x 20 mm, 118°
    16,28 €
  • ATORN twist drill TLP HSSE, DIN 338, type GS, 11.2 mm x 142 mm x 94 mm, 130°
    28,80 €
  • ATORN twist drill TLP HSSE, DIN 338, type GS, 7.7 mm x 117 mm x 75 mm, 130°
  •
    DIY hard foam inserts 476x320x30 mm, empty
Herstellerinformationen