Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

INTERAPID lever gauge probe, 0.01 mm graduation, 37.5 mm, vertical

INTERAPID lever gauge probe, 0.01 mm graduation, 37.5 mm, vertical

INTERAPID lever gauge probe, 0.01 mm graduation, 37.5 mm, vertical
Bild
Bild
Item no: 1001333 392 

Online price:

Available in 6-8 working days.

Application
For measuring deviations in concentricity, axial run-out, parallelism and flatness. For centring borehole shafts and aligning workpieces.

Execution
  • Housing with hardened dovetail fixtures bolted on
  • High sensitivity, low measuring force
  • Automatic switching of probing direction
  • Measuring mechanism on ruby bearings
  • Mounted using dovetail or shank with dia. 4 mm

Advantage
  • Indicator contact point with 12° contact angle (The INTERAPID 312 are designed so that the measured value will be correct with no need for adjustment at a contact angle α of 12° between the indicator contact point and workpiece surface. For any other contact angle, including where the indicator contact point is parallel to the workpiece surface, the measured values must be corrected)
  • Monté sur queue d'aronde ou tige Ø 4 mm

Delivery
1x dial test indicator
1x plunger with contact point made of hardened steel (2 mm diameter)
1x case


Brand: TESA TECHNOLOGY
Length measuring range: 1,6 mm
Scale value: 0,01 mm
Diameter: 37,5 mm
Length of measuring sensor from centre of ball: 16,5 mm
Measurement force: 0,12 N
Connection thread: M1.7
Data transmission type: 0 - not applicable
Material of measuring ball: Steel
Ball diameter: 2 mm
Pivot range of measuring sensor: 210 Degree
Calibration Group: L

Manufacturer part no.: 074111375

EAN no.: 7630041119176

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN A-Mech 2 assembly glove, size 10
    2,60 €
  • Repl. blades trapezoidal + deep edge for cat. no. 62035 103+202 pack=10 pcs
    4,85 €
  • Eyewash bottle sodium chloride solution according to DIN 15154-4 contents 200 ml
    10,70 €
  • Nylon knitted glove Royaltec Tech 2107 PU = 12 pairs size 9
    32,40 €
  • ATORN tool holder with ratchet M5-M12 length 100 mm
    16,61 €
  • ATORN A-Mech 2 assembly glove, size 9
    2,60 €
  • Nylon knitted glove Royaltec Tech 2107 PU = 12 pairs size 10
    32,40 €
  • Sheath-stripping and wire-stripping tool length 130 mm
    27,95 €
  • Diamond needle file set, 5 pieces, universal grit D 126 = medium, L=140 mm
    127,58 €
  • ATORN cable knife with folding blade, wire scraper
    6,01 €
  • ATORN combination wrench 12 mm DIN 3113 A
    6,00 €
  • Triangular engineer's file DIN 7261 C length 150 mm cut 3
    6,22 €
Herstellerinformationen