RAKSO - Wire wool grade of fineness fine 00

Application
Wood: For sanding after priming and before applying the first paint layer. The natural grain pattern is greatly enhanced on textured woods.
Paint: Removes old paint layers from antique furniture in combination with paint stripper. Roughens old painted surfaces before applying new paint.
Metal: Cleans copper pipes and copper fittings before soldering. Removes stubborn dirt, surface rust, oil contamination and limescale deposits.
Cleaning: Ideal for removing dirt from garden furniture and blinds. Glass blocks and tiles are effectively cleaned without scratching.

Execution

Fine types numbers 0000, 000 and 00 can be used to smooth wood after staining, spruce up waxed woods with new wax, thoroughly and gently clean plastic blinds and garden furniture and polish aluminium, copper and brass
Medium types numbers 0, 1 and 2 can be used to smooth wood after priming, remove old paints using solvents, sand plasterboard, remove dirt residues from tiles and stone flooring and polish copper piping and fittings before soldering
Coarser types numbers 3, 4 and 5 can be used to enhance natural grain patterns in softwoods (pine, spruce), clean glazing and glass blocks and roughen old paint and coatings
Stark verschmutzte Oberflächen:
Zum Entfernen von Fett oder Öl von Oberflächen, besonders bei hartnäckigen Verschmutzungen.
Reinigung von Glasoberflächen / Fenstern:
Zur Beseitigung von hartnäckigen Ablagerungen wie Rost, Mineralien oder Schmutz von Glas.
ACHTUNG: Hierbei sollte jedoch eine sehr feine Stahlwolle (ab Feinheitsgrad gelb 00) verwendet werden, um das Glas nicht zu zerkratzen.

Advantage
RAKSO STEEL WOOL is available in nine varieties with a clear colour coding system: YELLOW is for fine types, ORANGE for medium types and RED for coarser types.

Notes
Beim Arbeiten mit Stahlwolle sind Schutzhandschuhe zu verwenden, da die feinen Drähte kleine Hautverletzungen verursachen können.
Zudem sollte man bei der Verwendung in feuchten Umgebungen darauf achten, dass keine Rostbildung auftritt, wenn die Stahlwolle in Kontakt mit Wasser kommt.

Wire wool grade of fineness fine 00

Wire wool grade of fineness fine 00

Description

Technical data

More details

Additional articles

Versions

No workshop should be without it:

Centre drill set HSSE TiALN form A, D=1-1.6-2-2.5-3.15-4-5

Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.

T-handle hand-held bit holder 411 RA

A-Shield 1 cut protection glove, size 9

Measuring and clamping vee blocks 80 mm w switch magnet, wooden case

Centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5

Analogue scriber 600 mm with fine adjustment

TX® screwdriver set 9 pieces T10-50

Screwdriver set in workshop stand, 7 pieces

Countersink set 90° HSS TiAlN shape C uneven pitch 3 clamping surfaces d. 6.3-20.5 mm

Micrometer 0-25 mm, in case

Corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m

Countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank

Plier wrench, 250 mm, width across flats up to 52 mm, chrome-plated

Twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 and CHD

Cs. + cs. deburring tool set 6 pcs 90° HSS-E dia. 6.3-20.5 mm in metal box

Reusable corded ear plugs

Multiclean cleaning cloth roll 1000 pcs 34x37 cm 2 ply blue perforated absorbent

Cutter blade with 18-mm snap-off blade, metal housing, with slide

VDE pliers set, 3 pieces, electro package

ATORN corundum abrasive fabric sheets (AO) G100 230 x 280 mm

A-View 1 safety glasses

spray bottle refillable 199-4

Steel cutting disc 125x1 mm

Dial gauge, 10 mm meas. diff. 0.01 mm graduation shock-res, dia. 58 mm

Twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 in box

T6 torque screwdriver with fixed blade, set to 0.6 Nm

A-Mech 2 assembly glove, size 9

Measuring cup set 3 pcs 0.5 l, 1.0 l, 2.0 l, transparent, coloured/raised scale

Caramba high-performance PTFE 500 ml spray can

Ret. ring pliers set, 8 pcs A1,A2,A11,A21,J1,J2,J11,J21 in roll-up pouch

Bit socket wrench set, 6 pieces, hexagon head

Hexagonal hex key set, 9 pieces, 1.5–10 mm, ball head, long, colourful

Digitales Drehmoment Testgerät, 5- 500 Nm 3/4 + 3/8 + 1/2 + 1/4 Zoll

Centre drill set HSS form A, D=1-1.6-2-2.5-3.15-4-5

VDE screwdriver set, 3 pcs, cross head PH 1-3

Cs. + cs. deburring tool set 6 pcs 90° HSS dia. 6.3-20.5 mm in plastic box

Twist drill bit set HSS-E Co5 1-10 mm 0.5 mm incremental 19 pieces

Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6

Disposable ear plugs, 400 pairs

Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H

LIZZARD Fühlhebelmessgerät Ø32mm Messbereich 0,5mm Ablesung 0,01mm

Metal saw bow for 300 mm saw blade length

Twist drill bit set Sprint Master 25 pcs DIN 338 HSS D 1.0-13.0 mm in box

Pneumatic micro die grinder, 9032MK, thread 1/4 inch, air cons. 75 l/min

Bit box 32 pcs, slotted, PH, PZ, hexagon socket, TX, with holder a. handle

Flat square, stainless 150 x 100 mm in line with DIN 875 precision 1

A-Shield 2 cut protection glove, size 9

Twist drill bit set STEP DRILL type N HSS vaporised 1-10.5 mm 0.5 and CHD

PreciStrip16 automatic wire-stripping pliers 0.08-16 mm²

NC machine reamer set, 3.0-12.0 mm, H7, HSSE

Ergonomic safety double lock knife SECUPRO 625

Countersink set 90° HSS, extremely unequal pitch 6.3-20.5 mm

A-Mech 22 assembly glove, size 9

Twist drill bit set STEP DRILL type N HSSE purple 1-10.5 mm 0.5 and CHD

Hose reel 9040N-13

Twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 and CHD

Hexagon screwdriver set, 9 pieces, 1.5–10 mm, with ball head, long

Cross-peen hammer 1,000 g with 3-component handle

Twist drill bit set STEP DRILL type N HSSE purple 1-10 mm 0.5 in box

PZ screwdriver set, 3 pcs, PZ 1-3, round blade

6-piece measuring instrument set, wooden case, digital vernier callipers

HSSE machine tap set M3-12 HSSE DL

Inspektionskamera VideoPocket HD

Industrial atomiser type R36.501 with 360° suction system

HHW twist drill bit set DIN 338 HSS type N dia. 1-13.0 mm in box

adapter set 958/7 Number of tools: 7

T-handle adapter screwdriver 411 A RA

Universal stripping tool ErgoStrip 135 mm

Pin punch set 751/6-1 No. of tools: 6

A-Shield 3 cut protection glove, size 9

Twist drill bit set STEP DRILL type N HSS TiN head 1-10.5 mm 0.5 and CHD