Wire wool grade of fineness fine 000

1043671102 Wire wool grade of fineness fine 000
Bild
Bild
Bild
Bild
Bild
Item no: 1043671102 

Online price:

Still in stock: 6
Buy now

Application
Wood: For sanding after priming and before applying the first paint layer. The natural grain pattern is greatly enhanced on textured woods.
Paint: Removes old paint layers from antique furniture in combination with paint stripper. Roughens old painted surfaces before applying new paint.
Metal: Cleans copper pipes and copper fittings before soldering. Removes stubborn dirt, surface rust, oil contamination and limescale deposits.
Cleaning: Ideal for removing dirt from garden furniture and blinds. Glass blocks and tiles are effectively cleaned without scratching.

Execution
  • Fine types numbers 0000, 000 and 00 can be used to smooth wood after staining, spruce up waxed woods with new wax, thoroughly and gently clean plastic blinds and garden furniture and polish aluminium, copper and brass
  • Medium types numbers 0, 1 and 2 can be used to smooth wood after priming, remove old paints using solvents, sand plasterboard, remove dirt residues from tiles and stone flooring and polish copper piping and fittings before soldering
  • Coarser types numbers 3, 4 and 5 can be used to enhance natural grain patterns in softwoods (pine, spruce), clean glazing and glass blocks and roughen old paint and coatings
  • Stark verschmutzte Oberflächen:
    Zum Entfernen von Fett oder Öl von Oberflächen, besonders bei hartnäckigen Verschmutzungen.
  • Reinigung von Glasoberflächen / Fenstern:
    Zur Beseitigung von hartnäckigen Ablagerungen wie Rost, Mineralien oder Schmutz von Glas.
    ACHTUNG: Hierbei sollte jedoch eine sehr feine Stahlwolle (ab Feinheitsgrad gelb 00) verwendet werden, um das Glas nicht zu zerkratzen.

Advantage
RAKSO STEEL WOOL is available in nine varieties with a clear colour coding system: YELLOW is for fine types, ORANGE for medium types and RED for coarser types.

Notes
Beim Arbeiten mit Stahlwolle sind Schutzhandschuhe zu verwenden, da die feinen Drähte kleine Hautverletzungen verursachen können.
Zudem sollte man bei der Verwendung in feuchten Umgebungen darauf achten, dass keine Rostbildung auftritt, wenn die Stahlwolle in Kontakt mit Wasser kommt.

Brand: RAKSO
Grain size: 000
Design: Endless
Form: Rectangular
Surface structure: Fine
Colour: Yellow
Length x width x thickness: 280 x 90 x 65 mm
Material to be processed: Colour | Glass | Wood | Universal use | Non-ferrous metal | Plastic | Gypsum plasterboard | Paint
Number of pieces per packet: 1 PCS

Manufacturer part no.: FEIN 000

EAN no.: 4003364106001

Product Datasheet Technical Datasheet
Additional articles

Please select a button.

Versions
loading
Keywords:

No workshop should be without it:

  • Connector set, 3 pieces, square output
    36,71 €
  • LOCTITE 270 threadlocker 50 g
    60,50 €
  • T-handle 411 A RA T-handle
    55,09 €
  • Countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm
    214,12 €
  • Twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 and CHD
    191,84 €
  • T-handle 416 RA T-handle Rapidaptor
    55,09 €
  • Ear defenders, 33 dB
    16,10 €
  • Hexagon screwdriver set, 9 pieces, 1.5–10 mm, with ball head, long
    18,98 €
  • HHW twist drill bit set DIN 338 HSS type N dia. 1-13.0 mm in box
    99,19 €
  • Countersink set 90° HSS TiAlN shape C uneven pitch 3 clamping surfaces d. 6.3-20.5 mm
    139,39 €
  • Disposable safety knife SECUMAX 150
    3,06 €
  • Blade scraper Argentax with extra wide handle replaceable blades
    7,76 €
  • Centre drill set HSSE TiALN form A, D=1-1.6-2-2.5-3.15-4-5
    260,18 €
  • Twist drill bit set STEP DRILL type N HSS vaporised 1-10.5 mm 0.5 and CHD
    120,56 €
  • Twist drill bit set HSS-E Co5 1-13 mm 0.5 mm incremental 25 pieces
    297,14 €
  • TX screwdriver set, 5 pcs, TX 10, 15, 20, 25, 30
    30,24 €
  • Lamella flap disc LSZ-F Vision zirconia alumina grain 60 dia. 125 mm
    8,16 €
  • Protective vice jaw set 125 mm 8 pieces in bag
    61,62 €
  • Inspektionskamera VideoPocket HD
    157,20 €
  • Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H
    79,77 €
  • Dial gauge, 10 mm meas. diff. 0.01 mm graduation shock-res, dia. 58 mm
    50,96 €
  • Ear plug dispenser
    34,90 €
  • LOCTITE LB 8040 rapid rust remover 400 ml
    16,20 €
  • Hexagonal hex key set, 9 pieces, 1.5–10 mm, ball head, colourful
    25,70 €
  • Pneumatic hose reel hose dia. 13 mm, hose length 15 m max. 20 bar
    192,55 €
  • Twist drill bit set STEP DRILL type N HSS vaporised 1-10 mm 0.5 in box
    93,19 €
  • Bit box 32 pcs, slotted, PH, PZ, hexagon socket, TX, with holder a. handle
    54,81 €
  • Countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm
    178,45 €
  • Pneumatic micro die grinder 9032 M air consumption 75 l/min length 132 mm
    120,66 €
  • Wire-stripping pliers PreciStrip16 type 12 52 195
    75,21 €
  • Countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank
    227,23 €
  • Countersink set, 90°, HSS, extremely unequal pitch 6.3-20.5mm, 3-flat shnk
    182,18 €
  • Pliers wrench 250 mm up to AF 52 mm 19x position box joint
    47,24 €
  • Metal saw bow for 300 mm saw blade length
    21,99 €
  • A-Shield 3 cut protection glove, size 9
    8,30 €
  • KNIPEX precision circlip pliers set, 8 pieces in box
    166,53 €
  • Banded ear plugs, 32 dB
    4,20 €
  • Adapter set 958/7
    79,64 €
  • Pliers set, 3 pcs comb. pliers, side cutters, high-tech water pump pliers
    54,67 €
  • Twist drill bit set STEP DRILL type N HSS TiN head 1-10.5 mm 0.5 and CHD
    140,71 €
  • Disposable ear plugs, 200 pairs
    28,00 €
  • Twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 and CHD
    288,64 €
  • Twist drill bit set Sprint Master 25 pcs DIN 338 HSS D 1.0-13.0 mm in box
    99,64 €
  • Cs. + cs. deburring tool set 6 pcs 90° HSS/TiN 6.3-20.5 mm in plastic box
    146,16 €
  • Safety goggles MAX C4 lens clear
    4,50 €
  • A-View 3 safety glasses
    7,70 €
  • Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.
    254,02 €
  • A-Mech 4 assembly glove, size 9
    4,30 €
  • A-Shield 1 cut protection glove, size 9
    7,60 €
  • Twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 and CHD
    224,66 €
  • Pocket tape measure 411 Vario EG I tape width 13 mm length 3 m
    28,78 €
  • LED magnifying lamp, 5 dioptres, 2-stage segment switching, 2.25x
    283,10 €
  • Countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm 3-flat shnk
    184,09 €
  • HSSE machine tap set M3-12 HSSE DL
    148,68 €
  • Twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 in box
    250,27 €
  • NC machine reamer set, 3.0-12.0 mm, H7, HSSE
    218,04 €
  • Funnel set 6 pieces dia. 50, 75, 100, 120, 150, 160 mm polyethylene
    14,40 €
  • Quick-change bit holder, 1/4 inch x 60 mm
    16,18 €
  • Safety goggles MAX T7 lens clear
    9,70 €
  • Twist drill bit set N HSS TiN head DIN 338 1.0-13.0 mm 0.5 in box
    207,84 €
  • Screwdriver set in workshop stand, 7 pieces
    61,32 €
  • Cs. + cs. deburring tool set 6 pcs 90° HSS dia. 6.3-20.5 mm in plastic box
    95,26 €
  • Pneumatic special oil 100 ml silicone-free with locking cap
    7,22 €
  • TX® screwdriver set 9 pieces T10-50
    131,90 €
  • Ergonomic safety double lock knife SECUPRO 625
    34,82 €
  • Twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 in box
    200,99 €
  • ATORN corundum abrasive fabric sheets (AO) G100 230 x 280 mm
    0,95 €
  • WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade
    43,47 €
  • Safety goggles MAX A1 lens clear
    7,90 €
  • Twist drill bit set N HSS TIN head DIN 338 1.0-10.0 mm in assortment case
    599,84 €
  • Tabletop scales type FCE 15 K5 w/LC display reading 5g max. weighing range 15kg
    128,30 €
  • Disposable ear plugs, 400 pairs
    51,00 €
  • Prec. countersink set 5 pcs HSS-E Alunit d. 6.3/10.4/16.5/20.5/25.0 mm
    238,39 €
  • 6-piece measuring instrument set, wooden case, digital vernier callipers
  • PZ screwdriver set, 3 pcs, PZ 1-3, round blade
    17,72 €
  • Twist drill bit set STEP DRILL type N HSSE purple 1-10 mm 0.5 in box
    149,78 €
  • A-View 5 full-vision safety goggles
    12,90 €
  • A-View 1 safety glasses
    8,70 €
  • Hexagon screwdriver set 8 pieces 2-10 mm
    120,50 €
  • 1/4 inch hexagon socket with flexible blade
    12,17 €
  • A-View 4 safety glasses
    5,70 €
  • Flat square, stainless 150 x 100 mm in line with DIN 875 precision 1
    18,66 €
  • Twist drill bit set STEP DRILL type N HSS TiN head 1-10 mm 0.5 in box
    115,10 €
  • Try square stainless 150 x 100 mm in line with DIN 875 precision 1
    33,67 €
  • Measuring and clamping vee blocks 80 mm w switch magnet, wooden case
    889,11 €
  • Analogue scriber 600 mm with fine adjustment
    615,00 €
  • Cross-peen hammer 1,000 g, hickory handle, nylon handle protect. sleeve
    19,18 €
  • Pliers set, 3 pcs Combination pliers, snipe nose pliers, side cutters
    72,29 €
  • 3D art. meas. stand with central clamping and micro fine adj., height 390 mm
    254,54 €
  • Ret. ring pliers set, 8 pcs A1,A2,A11,A21,J1,J2,J11,J21 in roll-up pouch
    98,56 €
  • Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6
    16,97 €
  • Set of flat hand engineer's files with handle, 5 pieces, L=200mm, German cut 2
    71,44 €
  • Multiclean cleaning cloth roll 1000 pcs 34x37 cm 2 ply blue perforated absorbent
    42,30 €
  • A-Shield 2 cut protection glove, size 9
    7,80 €
  • Steel cutting disc 125x1 mm
    1,28 €
  • Centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5
    252,54 €
  • HSSE machine tap set M3-12 HSSE GL
    146,86 €
  • A-Mech 2 assembly glove, size 9
    2,80 €
  • A-Mech 1 assembly glove, size 9
    1,95 €
  • LOCTITE 243 threadlocker 50 g
    61,60 €
  • Countersink set 90° HSS, extremely unequal pitch 6.3-20.5 mm
    178,45 €
  • Countersink set 90° HSS TiAlN shape C uneven pitch 3 clamping surfaces d. 6.3-25.0 mm
    159,84 €
  • Reusable corded ear plugs
    1,70 €
  • Digitales Drehmoment Testgerät, 5- 500 Nm 3/4 + 3/8 + 1/2 + 1/4 Zoll
    543,60 €
  • Hexagon screwdriver set, ball head set, 5 pieces, 3–8 mm
    28,73 €
  • ErgoStrip universal stripping tool 0.2-4.0 mm length 135 mm right-handed
    31,44 €
  • Ear defenders, 37 dB
    18,10 €
  • A-Mech 22 assembly glove, size 9
    2,95 €
  • Free-hand cutting disc, straight, universal line PSF STEELOX grit 60 125x1.0 mm
    1,93 €
  • Long hexagon ball head pin wrench set 9 pcs in clip AF 1.5/2/2.5/3/4/5/6/8/10
    39,78 €
  • Centre drill set HSS form A, D=1-1.6-2-2.5-3.15-4-5
    84,46 €
  • VDE screwdriver set, 3 pcs, cross head PH 1-3
    17,22 €
  • LIZZARD Fühlhebelmessgerät Ø32mm Messbereich 0,5mm Ablesung 0,01mm
    133,20 €
  • Caramba high-performance PTFE 500 ml spray can
    19,04 €
  • Twist drill bit set HSS-E Co5 1-10 mm 0.5 mm incremental 19 pieces
    163,08 €
  • Cutter blade with 18-mm snap-off blade, metal housing, with slide
    17,43 €
  • Cs. + cs. deburring tool set 6 pcs 90° HSS-E dia. 6.3-20.5 mm in metal box
    123,05 €
  • Spray bottle refillable 227 ml max. operating pressure 8 bar 0.4 kg
    59,86 €
  • Twist drill bit set Sprint Master 19 pcs DIN 338 HSS D 1.0-10.0 mm in box
    50,31 €
  • Wooden folding rule, white 2 m EC class III, with angle scale
    7,49 €
  • A-View 2 safety glasses
    6,90 €
  • Micrometer 0-25 mm, in case
    53,00 €
  • Corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m
    32,21 €
  • Industrial atomiser type R36.501 with 360° suction system
    19,99 €
  • Twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 in box
    169,93 €
  • Twist drill bit set STEP DRILL type N HSSE purple 1-10.5 mm 0.5 and CHD
    181,81 €
  • Bit socket wrench set, 6 pieces, hexagon head
    42,98 €
  • Profi-line intensive brake cleaner spray can 500 ml pack=15 cans
    99,71 €
  • Measuring cup set 3 pcs 0.5 l, 1.0 l, 2.0 l, transparent, coloured/raised scale
    19,22 €
  • Cross-peen hammer 1,000 g with 3-component handle
    28,51 €
  • Lamella flap disc Z SG POWER STEELOX, dia. 125 mm, alumina zirconia, 40 grit
    6,16 €
  • Multifunction spray WD-40 400 ml
    8,94 €
  • Vernier calipers IP67 electr. 150 mm depth gauge flat
    185,84 €
  • A-Shield 4 cut protection glove, size 9
    8,60 €
  • A-Mech 3 assembly glove, size 9
    3,15 €
  • Octagonal pin punch set 6 pieces dia. 2-8 mm in stand
    39,56 €
Herstellerinformationen